by Chrysler (FCA US, LLC)
DODGE 400 RECALLS - (8 Recalls Found)
Since 1977, DODGE has issued a total of 2081 car recalls worldwide. Of those recalls, 8 have been for the DODGE 400 starting in 1982. This accounts for approximately 3.6% of the 58048 car recalls issued by the NHTSA since 1966. The 400 accounts for less than 1.0% of all the DODGE recalls issued since 1977. Compared to other car manufacturers, DODGE ranks #9 in overall number of recalls issued by a car maker.
Please keep in mind these numbers are for statistical purposes only & do not necessarily reflect the quality of the DODGE 400 or DODGE itself. These figures are based only on the number of recalls issued and NOT the total number of vehicles affected by a particular recall.
Find your DODGE 400 listed below. Results are sorted year from newest to oldest. Select the desired DODGE 400 to view the complete recall details.
Information provided by the National Highway Traffic Safety Administration.
| View DODGE 400 Recalls Below ↓ |
|
1983 Recalls ↓
Problem: ON THE INVOLVED VEHICLES, IMPROPER ROUTING OF THE HYDRAULIC BRAKE TUBE COULD CAUSE IT TO CHAFE AGAINST THE PARK BRAKE CABLES. EVENTUALLY, THE BRAKE TUBE MAY FAIL AND BRAKE FLUID LEAKAGE MAY OCCUR. Recall Details - 9/9/1982
Problem: THE TRAVEL COMPUTER SYSTEM WIRING, ON THE INVOLVED VEHICLES, MAY BE IMPROPERLY CONNECTED. THIS CONDITION CAN CAUSE DAMAGE TO INTERNAL COMPONENTS. Recall Details - 9/24/1982
Problem: HYDRAULIC BRAKE TUBING ROUTED TO THE LEFT REAR WHEEL BRAKE SYSTEM MAY HAVE BEEN BENT OUT OF SHAPE DURING ASSEMBLY AND COULD CHAFE AGAINST THE EXHAUST SYSTEM HANGER BOLT. Recall Details - 12/9/1982
Problem: LOCATION OF HYDRAULIC BRAKE TUBE TO BOTH REAR WHEELS CAUSES INTERFERENCE AND CHAFING BETWEEN THE TUBES AND REAR SUSPENSION TRAILING ARM PIVOT BRACKETS. Recall Details - 6/6/1983
Problem: FRONT SUSPENSION CROSSMEMBER MAY CORRODE AND FAIL AT LOWER CONTROL ARM REAR PIVOT MOUNTS IF OPERATED WHERE SALT IS USED TO AID IN SNOW REMOVAL. Recall Details - 3/29/1989
1982 Recalls ↓
Problem: CLAMP BOLTS INSTALLED ON CERTAIN VEHICLES MAY CONTAIN CRACKS. EVENTUALLY THESE BOLTS MAY BREAK THROUGH, CAUSING SEPARATION OF THE BALL JOINT FROM THE STEERING KNUCKLE. Recall Details - 5/27/1982
Problem: THE BRAKE HYDRAULIC SYSTEM BAY BE EQUIPPED WITH BRAKE FLUID CONTAINING AN EXCESS OF WATER. Recall Details - 6/15/1982
Problem: FRONT SUSPENSION CROSSMEMBER MAY CORRODE AND FAIL AT LOWER CONTROL ARM REAR PIVOT MOUNTS IF OPERATED WHERE SALT IS USED TO AID IN SNOW REMOVAL. Recall Details - 3/29/1989
|