Ford Ranger Recall for Hydraulic Problem - (6 Recalls Found)
Find your car listed below. Results are sorted year from newest to oldest. Select the desired vehicle to view the complete details.
Information provided by the National Highway Traffic Safety Administration.
|
|
|
Problem: FORD IS RECALLING CERTAIN MODEL YEAR 2010 RANGER VEHICLES MANUFACTURED FROM JUNE 8, 2009 THROUGH FEBRUARY 2, 2010 EQUIPPED WITH MANUAL TRANSMISSION. IT IS POSSIBLE FOR THE PARKING BRAKE CABLE TO BECOME DISCONNECTED FROM THE RIGHT REAR ACTUATOR DURING COLD WEATHER. THIS MAY OCCUR WHEN THE PARKING BRAKE IS RELEASED IF WET PARKING BRAKE SHOES HAVE FROZEN IN THE APPLIED POSITION. IF THE RIGHT REAR PARKING BRAKE CABLE BECOMES DISCONNECTED, THE PEDAL WILL HAVE EXTENDED TRAVEL AND MAY NOT FULLY APPLY THE PARKING BRAKE. Recall Details
Problem: THE STUDS WHICH ATTACH THE BRAKE MASTER CYLINDER TO THE POWER BRAKE VACUUM BOOSTER ASSEMBLY CAN DEVELOP STRESS CORROSION CRACKING AFTER BEING OPERATED FOR AN EXTENDED PERIOD OF TIME IN THE SOUTHERN CALIFORNIA LOCATION. Recall Details
Problem: THE STUDS WHICH ATTACH THE BRAKE MASTER CYLINDER TO THE POWER BRAKE VACUUM BOOSTER ASSEMBLY CAN DEVELOP STRESS CORROSION CRACKING AFTER BEING OPERATED FOR AN EXTENDED PERIOD OF TIME IN THE SOUTHERN CALIFORNIA LOCATION. Recall Details
Problem: THE STUDS WHICH ATTACH THE BRAKE MASTER CYLINDER TO THE POWER BRAKE VACUUM BOOSTER ASSEMBLY CAN DEVELOP STRESS CORROSION CRACKING AFTER BEING OPERATED FOR AN EXTENDED PERIOD OF TIME IN THE SOUTHERN CALIFORNIA LOCATION. Recall Details
Problem: THE STUDS WHICH ATTACH THE BRAKE MASTER CYLINDER TO THE POWER BRAKE VACUUM BOOSTER ASSEMBLY CAN DEVELOP STRESS CORROSION CRACKING AFTER BEING OPERATED FOR AN EXTENDED PERIOD OF TIME IN THE SOUTHERN CALIFORNIA LOCATION. Recall Details
Problem: TRUCKS WERE BUILT WITH INCORRECT REAR BRAKE ASSEMBLIES. CONSEQUENCE OF DEFECT: A TENDENCY FOR REAR BRAKE LOCKUP WOULD EXIST PARTICULARLY DURING HEAVY BRAKE APPLICAION WITH A LIGHTLY LOADED TRUCK. ALSO, INCREASED STOPPING DISTANCE WOULD BE REQUIRED IF THE BRAKE MODULATION (PUMPING THE BRAKES) IS USED TO CONTROL THE VEHICLE DURING A HARD BRAKE STOP. Recall Details
|