Auto Recalls for Consumers

INTERNATIONAL 9000 Recalls - View the latest INTERNATIONAL 9000 Recalls from the NHTSA

 
Auto Recalls For Consumers
by Navistar, Inc.

INTERNATIONAL 9000 RECALLS - (14 Recalls Found)

Find your vehicle listed below. Results are sorted year from newest to oldest. Select the desired vehicle to view the complete details. Information provided by the National Highway Traffic Safety Administration.
Subscribe to RSS Feed


2009 INTERNATIONAL 9000 Recall - PARKING BRAKE:CONVENTIONAL:AIR

Problem: INTERNATIONAL IS RECALLING MY 2008-2009 4000, 5000, 7000, 8000, 9000 AND PROSTAR TRACTOR/TRUCKS EQUIPPED WITH BENDIX MV-3 DASH CONTROL VALVES. THE MOLDED VALVE BODY HAS AN INCORRECT CORE PIN IN THE INJECTION MOLD CAUSING THE VALVE BODY TO BE OVERSIZED IN THE DOUBLE CHECK VALVE AREA. THIS CONDITION CAN ALLOW THE RUBBER DOUBLE CHECK VALVE TO BECOME LODGED IN THE BODY OPENING UNDER CERTAIN CIRCUMSTANCES. Recall Details

2008 INTERNATIONAL 9000 Recall - PARKING BRAKE:CONVENTIONAL:AIR

Problem: INTERNATIONAL IS RECALLING MY 2008-2009 4000, 5000, 7000, 8000, 9000 AND PROSTAR TRACTOR/TRUCKS EQUIPPED WITH BENDIX MV-3 DASH CONTROL VALVES. THE MOLDED VALVE BODY HAS AN INCORRECT CORE PIN IN THE INJECTION MOLD CAUSING THE VALVE BODY TO BE OVERSIZED IN THE DOUBLE CHECK VALVE AREA. THIS CONDITION CAN ALLOW THE RUBBER DOUBLE CHECK VALVE TO BECOME LODGED IN THE BODY OPENING UNDER CERTAIN CIRCUMSTANCES. Recall Details

2006 INTERNATIONAL 9000 Recall - WHEELS

Problem: ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH ACCURIDE ALUMINUM WHEELS, THE WHEELS WERE NOT PROPERLY PRE-STRESSED. THIS ALLOWS CRACKS TO DEVELOP OVER TIME. Recall Details

2005 INTERNATIONAL 9000 Recall - SUSPENSION

Problem: CERTAIN TRUCKS EQUIPPED WITH HOLLAND/NEWAY AIR SUSPENSION SYSTEMS, A TRANSVERSE BEAM CASTING MAY FRACTURE UNDER NORMAL LOADS. IF A CASTING BREAKS WHEN THE VEHICLE IS TRAVELING ON A ROADWAY THERE IS THE POTENTIAL FOR PIECES OF THE CASTING TO BECOME PROJECTILES AND THE SUSPENSION'S TRANSVERSE BEAM MAY DROP DOWN LOW ENOUGH TO CONTACT THE ROAD SURFACE. Recall Details

2005 INTERNATIONAL 9000 Recall - WHEELS

Problem: ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH ACCURIDE ALUMINUM WHEELS, THE WHEELS WERE NOT PROPERLY PRE-STRESSED. THIS ALLOWS CRACKS TO DEVELOP OVER TIME. Recall Details

2005 INTERNATIONAL 9000 Recall - ENGINE AND ENGINE COOLING

Problem: ON CERTAIN TRUCKS EQUIPPED WITH CATERPILLAR DIESEL ENGINES, THE VARIABLE VALVE ACTUATION (VVA) OIL LINE MAY WEAR AGAINST THE SHARP EDGE OF THE CYLINDER HEAD IF NOT POSITIONED CORRECTLY. Recall Details

2004 INTERNATIONAL 9000 Recall - ENGINE AND ENGINE COOLING

Problem: ON CERTAIN TRUCKS EQUIPPED WITH CATERPILLAR DIESEL ENGINES, THE VARIABLE VALVE ACTUATION (VVA) OIL LINE MAY WEAR AGAINST THE SHARP EDGE OF THE CYLINDER HEAD IF NOT POSITIONED CORRECTLY. Recall Details

2004 INTERNATIONAL 9000 Recall - SUSPENSION

Problem: CERTAIN TRUCKS EQUIPPED WITH HOLLAND/NEWAY AIR SUSPENSION SYSTEMS, A TRANSVERSE BEAM CASTING MAY FRACTURE UNDER NORMAL LOADS. IF A CASTING BREAKS WHEN THE VEHICLE IS TRAVELING ON A ROADWAY THERE IS THE POTENTIAL FOR PIECES OF THE CASTING TO BECOME PROJECTILES AND THE SUSPENSION'S TRANSVERSE BEAM MAY DROP DOWN LOW ENOUGH TO CONTACT THE ROAD SURFACE. Recall Details

2003 INTERNATIONAL 9000 Recall - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM

Problem: ON CERTAIN HEAVY DUTY TRUCKS EQUIPPED WITH CATERPILLAR ENGINES, A SINGLE BANK TYPE EXHAUST CLAMP WAS INSTALLED ON THE TAIL PIPES INSTEAD OF A DOUBLE BAND TYPE CLAMP. Recall Details

2003 INTERNATIONAL 9000 Recall - SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE

Problem: ON CERTAIN HEAVY DUTY TRUCKS EQUIPPED WITH BENDIX TC-7 TRAILER CONTROL HAND-OPERATED VALVE WITH PUSH-TO-CONNECT FITTINGS. THE DELIVERY PORT IN THE VALVE BODY MAY BE PARTIALLY BLOCKED DUE TO A PROBLEM DURING THE MODING PROCESS.Recall Details

2002 INTERNATIONAL 9000 Recall - SERVICE BRAKES, AIR

Problem: ON CERTAIN HEAVY DUTY TRUCKS, A BRASS FITTING CONNECTS THE DOUBLE CHECK VALVE TO THE BRAKE RELAY VALVE. WITH CERTAIN INPUTS TO THE VEHICLE, THE WEIGHT OF THE CHECK VALVE ON THE FITTING CAN CAUSE THE ASSEMBLY TO RESONATE. THE SUBJECT VIBRATION CAN CAUSE EXCESSIVE STRAIN LEVELS IN THE FITTING, WHICH COULD EVENTUALLY FATIGUE AND FAIL. Recall Details

2002 INTERNATIONAL 9000 Recall - SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE

Problem: ON CERTAIN MEDIUM AND HEAVY DUTY TRUCKS, A BRASS FITTING CONNECTS THE DOUBLE CHECK VALVE TO THE BRAKE RELAY VALVE. WITH CERTAIN INPUTS TO THE VEHICLE, THE WEIGHT OF THE CHECK VALVE ON THE FITTING CAN CAUSE THE ASSEMBLY TO RESONATE. THE SUBJECT VIBRATION CAN CAUSE EXCESSIVE STRAIN LEVELS IN THE FITTING, WHICH COULD EVENTUALLY FATIGUE AND FAIL.Recall Details

2002 INTERNATIONAL 9000 Recall - SERVICE BRAKES, AIR:SUPPLY:CHECK VALVE

Problem: ON CERTAIN HEAVY DUTY TRUCKS EQUIPPED WITH BENDIX TC-7 TRAILER CONTROL HAND-OPERATED VALVE WITH PUSH-TO-CONNECT FITTINGS. THE DELIVERY PORT IN THE VALVE BODY MAY BE PARTIALLY BLOCKED DUE TO A PROBLEM DURING THE MODING PROCESS.Recall Details

2002 INTERNATIONAL 9000 Recall - SUSPENSION:FRONT:HUB

Problem: ON CERTAIN HEAVY AND MEDIUM DUTY TRUCKS AND BUSES EQUIPPED WITH TRUCK HUB UNITS MANUFACTURED BY SKF EXCLUSIVELY FOR USE ON ARVINMERITOR'S FF98X SERIES NON-DRIVE STEER AXLES, THE HUB UNIT BEARINGS CAN WEAR PREMATURELY.Recall Details
Home  •  Car Recalls  •  Tires  •  Motorcycles  •  RVs  •  Commercial Vehicles  •  Car Seats  •  Complaints  •  Sitemap  •  Privacy Policy

Edmunds  •  Kelley Blue Book  •  SaferCar.gov  •  Consumer Recalls  •  Government Recalls
Follow arfc_recalls on TwitterRSS Feeds