|
Problem: Mack Trucks, Inc. is recalling certain model year 2013-2014 CHU, CXU, GU, MRU, and LEU trucks manufactured July 16, 2012, through march 18, 2013 and equipped with drum brakes. The clevis pin for the brake slack adjuster may be missing a cotter pin. If the cotter pin is not installed, the clevis pin may loosen and fall out causing a loss of brake function on the affected wheel. Recall Details
Problem: Mack Trucks, Inc. is recalling certain model year 2013-2014 CHU, CXU, GU, MRU, and LEU trucks manufactured July 16, 2012, through march 18, 2013 and equipped with drum brakes. The clevis pin for the brake slack adjuster may be missing a cotter pin. If the cotter pin is not installed, the clevis pin may loosen and fall out causing a loss of brake function on the affected wheel. Recall Details
Problem: MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2011-2012 CHU, CXU, GU, LEU AND MRU TRUCKS MANUFACTURED FROM OCTOBER 15, 2010, THROUGH JANUARY 31, 2011, AND EQUIPPED WITH GUNITE AUTOMATIC SLACK ADJUSTERS. DUE TO AN INCOMPLETE "KNITTING" OF THE IRON AT THE TIME OF CASTING, INADEQUATE STRUCTURAL INTEGRITY OF THE SLACK ADJUSTER HOUSING CAN OCCUR, WHICH COULD CAUSE THE HOUSING TO BREAK AT THE HANDLE UNDER NORMAL OPERATING LOADS. Recall Details
Problem: MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2012, CHU, CXU, GU, MRU, LEU, AND TD TRUCKS EQUIPPED WITH A MERITOR DRIVELINE. THE TUBING USED TO ASSEMBLE THE AFFECTED DRIVELINES HAS A NONCONFORMING SEAM WELD WITH INSUFFICIENT BONDING OF THE MATERIAL. Recall Details
Problem: MACK IS RECALLING CERTAIN MODEL YEAR 2012 CHU, CXU, AND GU VEHICLES, MANUFACTURED FROM OCTOBER 10, 2011, THROUGH NOVEMBER 17, 2011. HARDWARE USED TO SECURE THE WINDSHIELD WIPER LINKAGE TO THE WIPER MOTOR MAY NOT BE SUFFICIENTLY TORQUED, AND MAY CAUSE THE WINDSHIELD WIPER LINKAGE TO DETACH FROM THE WIPER MOTOR. AS A RESULT, THE WINDSHIELD WIPERS WILL NOT FUNCTION. Recall Details
Problem: MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2008-2011 CHU AND CXU HEAVY TRUCKS MANUFACTURED FROM JANUARY 2008 THROUGH JULY 2010. THERE MAY BE AN INTERFERENCE WITH THE BOLTS USED TO SECURE THE FIFTH WHEEL TO THE FRAME THAT CAN PREVENT THE BOLTS FROM BEING TORQUED TO SPECIFICATION. Recall Details
Problem: MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2011-2012 CHU, CXU, GU, LEU AND MRU TRUCKS MANUFACTURED FROM OCTOBER 15, 2010, THROUGH JANUARY 31, 2011, AND EQUIPPED WITH GUNITE AUTOMATIC SLACK ADJUSTERS. DUE TO AN INCOMPLETE "KNITTING" OF THE IRON AT THE TIME OF CASTING, INADEQUATE STRUCTURAL INTEGRITY OF THE SLACK ADJUSTER HOUSING CAN OCCUR, WHICH COULD CAUSE THE HOUSING TO BREAK AT THE HANDLE UNDER NORMAL OPERATING LOADS. Recall Details
Problem: MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2011 CHU AND CXU, HEAVY TRUCKS MANUFACTURED FROM JULY 13, 2010, THROUGH AUGUST 13, 2010, WITHOUT REAR MUD FLAP HANGER BRACKETS. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THE REAR CONSPICUITY TREATMENT TYPICALLY FOUND ON THE MUD FLAP HANGER BRACKETS MAY NOT HAVE BEEN INSTALLED IN THE ALTERNATE POSITIONS AS ALLOWED IN THE REGULATION ON VEHICLES MANUFACTURED WITHOUT REAR MUD FLAP HANGER BRACKETS. Recall Details
Problem: MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2010-2011 CHU, CXU AND GU HEAVY TRUCKS MANUFACTURED FROM JULY 12, 2010, THROUGH JULY 23, 2010 FOR A POTENTIALLY DEFECTIVE WELD ON THE SHAFT THAT THE CLUTCH PEDAL ATTACHES TO. Recall Details
Problem: Mack is recalling certain model year 2007-2010 CHU and CXU vehicles, manufactured from October 13, 2006, through December 23, 2009 and equipped with daytime running lights and fog lights. A short in the fog light circuit may cause the low beam headlight circuit to cut out. Recall Details
Problem: Mack is recalling certain model year 2007-2010 CHU and CXU vehicles, manufactured from October 13, 2006, through December 23, 2009 and equipped with daytime running lights and fog lights. A short in the fog light circuit may cause the low beam headlight circuit to cut out. Recall Details
Problem: MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2008-2011 CHU AND CXU HEAVY TRUCKS MANUFACTURED FROM JANUARY 2008 THROUGH JULY 2010. THERE MAY BE AN INTERFERENCE WITH THE BOLTS USED TO SECURE THE FIFTH WHEEL TO THE FRAME THAT CAN PREVENT THE BOLTS FROM BEING TORQUED TO SPECIFICATION. Recall Details
Problem: MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2010-2011 CHU, CXU AND GU HEAVY TRUCKS MANUFACTURED FROM JULY 12, 2010, THROUGH JULY 23, 2010 FOR A POTENTIALLY DEFECTIVE WELD ON THE SHAFT THAT THE CLUTCH PEDAL ATTACHES TO. Recall Details
Problem: MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2008-2011 CHU AND CXU HEAVY TRUCKS MANUFACTURED FROM JANUARY 2008 THROUGH JULY 2010. THERE MAY BE AN INTERFERENCE WITH THE BOLTS USED TO SECURE THE FIFTH WHEEL TO THE FRAME THAT CAN PREVENT THE BOLTS FROM BEING TORQUED TO SPECIFICATION. Recall Details
Problem: Mack is recalling certain model year 2007-2010 CHU and CXU vehicles, manufactured from October 13, 2006, through December 23, 2009 and equipped with daytime running lights and fog lights. A short in the fog light circuit may cause the low beam headlight circuit to cut out. Recall Details
Problem: Mack is recalling certain model year 2007-2010 CHU and CXU vehicles, manufactured from October 13, 2006, through December 23, 2009 and equipped with daytime running lights and fog lights. A short in the fog light circuit may cause the low beam headlight circuit to cut out. Recall Details
Problem: ON CERTAIN TRUCKS, THE NUT USED TO RETAIN THE STEERING SHAFT MAY OR MAY NOT BE A LOCK NUT THAT HAS THE LOCKING FEATURE. A LOCK NUT IS REQUIRED TO PROVIDE ADDITIONAL RESISTANCE TO ENSURE THAT THE NUT DOES NOT COME LOOSE. Recall Details
Problem: ON CERTAIN TRUCKS, AN UNPROTECTED LEAD IN THE THERMOSWITCH OF THE HEATER MAY MAKE CONTACT WITH ANOTHER POST POSSIBLY CREATING A SHORT CIRCUIT, WHICH CAN RESULT IN CONTINUOUS OPERATION OF THE HEATING ELEMENT. Recall Details
Problem: ON CERTAIN TRUCKS EQUIPPED WITH BENDIX SR-7 SPRING BRAKE MODULATING VALVES, THE INTERNAL RUBBER CHECK VALVE MAY LEAK CAUSING A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER THE OPERATOR PULLS THE DASH VALVE BUTTON. Recall Details
Problem: ON CERTAIN TRUCKS EQUIPPED WITH PARKER SINGLE CHECK VALVES (SCV) PROVIDED BY BENDIX. THE DEFECT EXISTS IN THE PARKER SCV THAT CONNECTS WITH THE SUPPLY PORT OF THE SR-7 SPRING BRAKE MODULATING VALVE. AFTER PROLONGED USE OF THE PARKER SCV, THE VALVE BODY RETAINER MAY BECOME EXCESSIVELY WORN AND EVENTUALLY BREAK APART. PIECES OF THE PARKER SCV CAN BECOME LODGED INSIDE THE SR-7 SPRING BRAKE MODULATING VALVE, POTENTIALLY CAUSING EITHER LEAKAGE OUT OF THE SR-7 VALVE OR PREVENTING AIR FROM PROPERLY EXHAUSTING FROM THE SR-7 VALVE. Recall Details
Problem: ON CERTAIN TRUCKS, THE DAYTIME RUNNING LIGHTS (DRL) MODULE MAY CONTAIN A SUSPECT METAL-OXIDE-SEMICONDUCTOR FIELD EFFECT TRANSISTOR (MOSFET) THAT COULD OVERHEAT. Recall Details
Problem: ON CERTAIN TRUCKS, THE BOLTS THAT ATTACH THE STEERING GEAR TO THE FRAME MAY NOT HAVE BEEN TIGHTENED TO THE SPECIFIED TORQUE. Recall Details
Problem: Mack is recalling certain model year 2007-2010 CHU and CXU vehicles, manufactured from October 13, 2006, through December 23, 2009 and equipped with daytime running lights and fog lights. A short in the fog light circuit may cause the low beam headlight circuit to cut out. Recall Details
Problem: Mack is recalling certain model year 2007-2010 CHU and CXU vehicles, manufactured from October 13, 2006, through December 23, 2009 and equipped with daytime running lights and fog lights. A short in the fog light circuit may cause the low beam headlight circuit to cut out. Recall Details
Problem: Mack is recalling certain model year 2007-2010 CHU and CXU vehicles, manufactured from October 13, 2006, through December 23, 2009 and equipped with daytime running lights and fog lights. A short in the fog light circuit may cause the low beam headlight circuit to cut out. Recall Details
Problem: Mack is recalling certain model year 2007-2010 CHU and CXU vehicles, manufactured from October 13, 2006, through December 23, 2009 and equipped with daytime running lights and fog lights. A short in the fog light circuit may cause the low beam headlight circuit to cut out. Recall Details
Problem: ON CERTAIN TRUCKS, THE NUT THAT RETAINS THE STEERING WHEEL MAY NOT HAVE BEEN INSTALLED. Recall Details
|