http://www.arfc.org/rss/feeds/autos/collins/dh416The latest automotive recalls from the National Highway Transportation Safety AdministrationFri, 19 Apr 2024 12:30:41 GMTen-us1440Copyright 2024, Eladrel Technologies, LLCAutomotiveCollins Bus Corporation (Collins) is recalling certain 2016 DH416 school buses manufactured February 18, 2016, to February 19, 2016 built on Ford chassis, and 2016 DE516 school buses manufactured January 18, 2016, to February 19, 2016 built on Chevrolet chassis. These vehicles are equipped with seats that may separate from the base frame due to bolt failure. As such, these seats fail to comply with the requirements of Federal Motor Vehicle Safety System (FMVSS) number 222, "School Bus Passenger Seating and Crash Protection."http://www.arfc.org/commercial/collins/dh416/recalls/000058894002007729000000318/recall.aspxTue, 17 May 2016 00:00:00 GMTCollins Bus Corporation (Collins) is recalling certain model year 2015 DE416, DE416WR, DE500, DE516, DE516WR, DH400, DH416, DH416WR, DH500, DH516, SH400, SL400, TH400, and TL400 school buses manufactured May 1, 2015, to December 21, 2015, equipped with certain Transpec T6000, T6100, and T7000 series school bus stop arms. The affected stop arms have a reflective decal that may peel loose from the stop arm. As such, these stop arms fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 131, "School Bus Pedestrian Safety Devices." http://www.arfc.org/commercial/collins/dh416/recalls/000058468001998076000000366/recall.aspxFri, 22 Jan 2016 00:00:00 GMTCollins Bus Corporation (Collins) is recalling certain model year 2014 Collins and Mid Bus school buses, models SL400, SL408, DH400, DH416, DE416WR, DH500, DH516 and DE516WR, manufactured from July 21, 2014, to August 19, 2014. The affected vehicles may have been assembled with an inadequate amount of adhesive on some interior side panel joints. In the case of a collision to the side of the vehicle, the edge interior panel may become exposed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 221, "School Bus Body Joint Strength."http://www.arfc.org/commercial/collins/dh416/recalls/000056787001977603000000275/recall.aspxWed, 03 Sep 2014 00:00:00 GMTCollins Bus Corporation (Collins) is recalling certain model year 2013 model school bus and multi-functional school activity buses manufactured August 20, 2013, through November 13, 2013 and equipped with IMMI-brand L9 seat belt buckles. When the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, making the seat belt difficult to unlatch. Thus, the buses fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 209, "Seat Belt Assemblies."http://www.arfc.org/commercial/collins/dh416/recalls/000055597001940937000000263/recall.aspxThu, 21 Nov 2013 00:00:00 GMTCollins is recalling certain model year 2012 Collins, Corbeil, and Mid-Bus school bus and multi-function school activity buses, models SL400, SH400, DH400, DH416 with 139" wheel base and two-passenger seat set at 24, 25, 26, 27, or 28" hip to knee spacing and three-passenger seat set at 24, 25, or 26" hip to knee spacing and model year 2012 DH500 and DH516 with 159" wheel base and two-passenger seat set at 28 or 29" hip to knee spacing and three-passenger seat set at 27, 28, or 29" hip to knee spacing. These buses were manufactured from March 12, 2012, through September 20, 2012. In some floor plans on these models of buses, there is the possibility that the fuel filler hose was damaged during seat or seat track installation or that a seat bolt and/or the seat bolt bracket interferes with the routing of the fuel fill hose. The fuel fill hose runs from the exterior of the bus, through a housing in the bus, then under the bus and toward the fuel tank. Some floor plans have a seat or track bolt that comes through the floor near the area where the hose crosses the chassis frame. In addition to possible damage during installation, there is a chance that the bolt or the bracket can abrade or puncture the hose in this area.http://www.arfc.org/commercial/collins/dh416/recalls/000047394001503813000000158/recall.aspxThu, 19 Jul 2012 00:00:00 GMTCollins is recalling certain model year 2012 Collins, Corbeil, and Mid-Bus school bus and multi-function school activity buses, models SL400, SH400, DH400, DH416 with 139" wheel base and two-passenger seat set at 24, 25, 26, 27, or 28" hip to knee spacing and three-passenger seat set at 24, 25, or 26" hip to knee spacing and model year 2012 DH500 and DH516 with 159" wheel base and two-passenger seat set at 28 or 29" hip to knee spacing and three-passenger seat set at 27, 28, or 29" hip to knee spacing. These buses were manufactured from March 12, 2012, through September 20, 2012. In some floor plans on these models of buses, there is the possibility that the fuel filler hose was damaged during seat or seat track installation or that a seat bolt and/or the seat bolt bracket interferes with the routing of the fuel fill hose. The fuel fill hose runs from the exterior of the bus, through a housing in the bus, then under the bus and toward the fuel tank. Some floor plans have a seat or track bolt that comes through the floor near the area where the hose crosses the chassis frame. In addition to possible damage during installation, there is a chance that the bolt or the bracket can abrade or puncture the hose in this area.http://www.arfc.org/commercial/collins/dh416/recalls/000047394001503813000000144/recall.aspxThu, 19 Jul 2012 00:00:00 GMTCollins is recalling certain model year 2012 Collins, Corbeil, and Mid-Bus school bus and multi-function school activity buses, models SL400, SH400, DH400, DH416 with 139" wheel base and two-passenger seat set at 24, 25, 26, 27, or 28" hip to knee spacing and three-passenger seat set at 24, 25, or 26" hip to knee spacing and model year 2012 DH500 and DH516 with 159" wheel base and two-passenger seat set at 28 or 29" hip to knee spacing and three-passenger seat set at 27, 28, or 29" hip to knee spacing. These buses were manufactured from March 12, 2012, through September 20, 2012. In some floor plans on these models of buses, there is the possibility that the fuel filler hose was damaged during seat or seat track installation or that a seat bolt and/or the seat bolt bracket interferes with the routing of the fuel fill hose. The fuel fill hose runs from the exterior of the bus, through a housing in the bus, then under the bus and toward the fuel tank. Some floor plans have a seat or track bolt that comes through the floor near the area where the hose crosses the chassis frame. In addition to possible damage during installation, there is a chance that the bolt or the bracket can abrade or puncture the hose in this area.http://www.arfc.org/commercial/collins/dh416/recalls/000047394001503813000000160/recall.aspxThu, 19 Jul 2012 00:00:00 GMT