http://www.arfc.org/rss/feeds/autos/navistar/5000The latest automotive recalls from the National Highway Transportation Safety AdministrationMon, 06 May 2024 00:10:11 GMTen-us1440Copyright 2024, Eladrel Technologies, LLCAutomotiveVEHICLE DESCRIPTION: HEAVY DUTY TRUCKS. THE ANTILOCK TRACTION RELAY VALVES WERE INCORRECTLY ASSEMBLED BY THE SUPPLIER. AN EXTRA CHECK VALVE WAS INSTALLED WHICH WILL NOT ALLOW THE TRACTION CONTROL SYSTEM TO FUNCTION PROPERLY.http://www.arfc.org/commercial/navistar/5000/recalls/000010048000081127000000084/recall.aspxMon, 24 Jan 2000 00:00:00 GMTVEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH DANA/SPRAGUE WINDSHIELD WIPER ASSEMBLIES. THE KNURLED PIVOT SHAFT (WHICH OPERATES THE WINDSHIELD WIPER ARM) IS WELDED TO A LEVER, WHICH CONNECTS TO LINKAGE FROM THE WIPER MOTOR. THE WELD AT THE PIVOT SHAFT TO LEVER CAN FAIL.http://www.arfc.org/commercial/navistar/5000/recalls/000009128000081127000000246/recall.aspxTue, 04 May 1999 00:00:00 GMTVEHICLE DESCRIPTION: HEAVY DUTY TRUCKS, TRANSIT AND SCHOOL BUSES, EQUIPPED WITH MERITOR AIR BRAKE AUTOMATIC SLACK ADJUSTERS. SOME OF THE AUTOMATIC SLACK ADJUSTERS HAD INSUFFICIENT TORQUE APPLIED TO THE GUIDE PAWL CAP SCREW.http://www.arfc.org/commercial/navistar/5000/recalls/000009037000081127000000087/recall.aspxTue, 16 Mar 1999 00:00:00 GMTVEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCK CHASSIS EQUIPPED WITH 16,000 LB., 18,000 LB., OR 20,000 LB. HEAVY DUTY STEERING AXLES. THE INNER WHEEL BEARING CONE FOR THE STEERING AXLE WHEEL HUB ASSEMBLY DOES NOT PROPERLY FIT ONTO THE NAVISTAR STEERING AXLE SPINDLE ASSEMBLY. IMPROPER FIT OF THE BEARING TO THE SPINDLE INCREASES THE STRESS LEVELS TO THE STEERING AXLE SPINDLE WHICH COULD CAUSE SPINDLE FAILURE.http://www.arfc.org/commercial/navistar/5000/recalls/000009021000081127000000042/recall.aspxMon, 15 Mar 1999 00:00:00 GMTVEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCK CHASSIS EQUIPPED WITH 16,000 LB., 18,000 LB., OR 20,000 LB. HEAVY DUTY STEERING AXLES. THE INNER WHEEL BEARING CONE FOR THE STEERING AXLE WHEEL HUB ASSEMBLY DOES NOT PROPERLY FIT ONTO THE NAVISTAR STEERING AXLE SPINDLE ASSEMBLY. IMPROPER FIT OF THE BEARING TO THE SPINDLE INCREASES THE STRESS LEVELS TO THE STEERING AXLE SPINDLE WHICH COULD CAUSE SPINDLE FAILURE.http://www.arfc.org/commercial/navistar/5000/recalls/000009021000078377000000042/recall.aspxMon, 15 Mar 1999 00:00:00 GMTVEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH SIX-SPOKE WHEEL ASSEMBLIES. THESE VEHICLES WERE MANUFACTURED WITH THE WRONG COMBINATIONS OF WHEEL ASSEMBLY PARTS. SHOULD THE SIX-SPOKE WHEEL ASSEMBLY HAVE MIS-MATCHED PARTS, HIGH STRESSES IN THE WHEEL STUDS AND POTENTIAL WHEEL FAILURES CAN OCCUR.http://www.arfc.org/commercial/navistar/5000/recalls/000008307000077206000000312/recall.aspxMon, 28 Jul 1997 00:00:00 GMTVEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH SIX-SPOKE WHEEL ASSEMBLIES. THESE VEHICLES WERE MANUFACTURED WITH THE WRONG COMBINATIONS OF WHEEL ASSEMBLY PARTS. SHOULD THE SIX-SPOKE WHEEL ASSEMBLY HAVE MIS-MATCHED PARTS, HIGH STRESSES IN THE WHEEL STUDS AND POTENTIAL WHEEL FAILURES CAN OCCUR.http://www.arfc.org/commercial/navistar/5000/recalls/000008307000077205000000312/recall.aspxMon, 28 Jul 1997 00:00:00 GMT