by Chrysler (FCA US, LLC)
Dodge RAM Recall for Front Problem - (14 Recalls Found)
Find your car listed below. Results are sorted year from newest to oldest. Select the desired vehicle to view the complete details.
Information provided by the National Highway Traffic Safety Administration.
|
|
|
Problem: VEHICLE DESCRIPTION: QUAD CAB PICKUP TRUCKS. THE UPPER CONTROL ARMS ATTACHED WITH CADMIUM COATED NUTS CAN CAUSE THE BOLTS TO STRETCH DUE TO THE APPLICATION OF A HIGHER THAN SPECIFIED CLAMP LOAD. BREAKAGE OF THE UPPER CONTROL ARM FASTENERS COULD CAUSE THE AXLE TO ROTATE FORWARD UNDER BRAKING CONDITIONS. Recall Details
Problem: VEHICLE DESCRIPTION: LIGHT DUTY PICKUP TRUCKS. THE WELDS AT THE RIGHT SIDE LOWER CONTROL ARM BRACKET TO AXLE TUBE ATTACHMENT MAY HAVE INADEQUATE FATIGUE LIFE DUE TO POOR WELD QUALITY. THIS CAN LEAD TO SEPARATION OF THE CONTROL ARM BRACKET FROM THE AXLE TUBE. Recall Details
Problem: VEHICLE DESCRIPTION: CERTAIN VAN, WAGON, PICKUP TRUCKS, PASSENGER AND SPORT UTILITY VEHICLES, FAIL TO COMPLY WITH REQUIREMENTS OF FMVSS NO. 209, "SEAT BELT ASSEMBLIES." THE FRONT SEAT BELT RETRACTOR MAY NOT COMPLY WITH THE REQUIREMENTS OF THE STANDARD. Recall Details
Problem: VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE FRONT SEAT BELT BUCKLES WERE NOT PROPERLY RIVETED TO THE SUPPORT STRAP. Recall Details
Problem: VEHICLE DESCRIPTION: VAN AND WAGON MODEL PASSENGER VEHICLES. IF WATER/ROAD SALT GETS ON THE INTERIOR FLOOR OF THE VEHICLE IN THE PROXIMITY OF THE AIR BAG ELECTRONIC CONTROL MODULE (AECM), THE AECM CAN CORRODE. THE RESULTING CORROSION CAN CAUSE THE DRIVER SIDE AIR BAG TO DEPLOY INADVERTENTLY. Recall Details
Problem: VEHICLE DESCRIPTION: VAN AND WAGON MODEL PASSENGER VEHICLES. IF WATER/ROAD SALT GETS ON THE INTERIOR FLOOR OF THE VEHICLE IN THE PROXIMITY OF THE AIR BAG ELECTRONIC CONTROL MODULE (AECM), THE AECM CAN CORRODE. THE RESULTING CORROSION CAN CAUSE THE DRIVER SIDE AIR BAG TO DEPLOY INADVERTENTLY. Recall Details
Problem: VEHICLE DESCRIPTION: LIGHT DUTY PICKUP TRUCKS. (2500 AND 3500 SERIES 4X4 REGULAR CAB PICKUP PRODUCED BEFORE MARCH 21, 1995; 2500 AND 3500 SERIES 4X4 CLUB CAB PICKUP PRODUCED BEFORE JUNE 8, 1995; AND 3500 SERIES 4X2/4X4 CHASSIS CAB TRUCKS PRODUCED BEFORE JUNE 21, 1995). THE FRONT SUSPENSION SPRING/SHOCK TOWERS CAN CRACK AND EVENTUALLY SEPARATE FROM THE VEHICLE FRAME. THE SHOCK TOWER COULD DAMAGE THE REAR WHEEL BRAKE LINES RESULTING IN LOSS OF REAR BRAKE SYSTEM PRESSURE. Recall Details
Problem: VEHICLE DESCRIPTION: VAN AND WAGON MODEL PASSENGER VEHICLES. IF WATER/ROAD SALT GETS ON THE INTERIOR FLOOR OF THE VEHICLE IN THE PROXIMITY OF THE AIR BAG ELECTRONIC CONTROL MODULE (AECM), THE AECM CAN CORRODE. THE RESULTING CORROSION CAN CAUSE THE DRIVER SIDE AIR BAG TO DEPLOY INADVERTENTLY. Recall Details
Problem: VEHICLE DESCRIPTION: LIGHT DUTY PICKUP TRUCKS. (2500 AND 3500 SERIES 4X4 REGULAR CAB PICKUP PRODUCED BEFORE MARCH 21, 1995; 2500 AND 3500 SERIES 4X4 CLUB CAB PICKUP PRODUCED BEFORE JUNE 8, 1995; AND 3500 SERIES 4X2/4X4 CHASSIS CAB TRUCKS PRODUCED BEFORE JUNE 21, 1995). THE FRONT SUSPENSION SPRING/SHOCK TOWERS CAN CRACK AND EVENTUALLY SEPARATE FROM THE VEHICLE FRAME. THE SHOCK TOWER COULD DAMAGE THE REAR WHEEL BRAKE LINES RESULTING IN LOSS OF REAR BRAKE SYSTEM PRESSURE. Recall Details
Problem: FRONT SUSPENSION TRACK BAR ATTACHMENT TO THE AXLE MAY NOT BE ADEQUATELY TIGHTENED. Recall Details
Problem: THE SEAT BACK LATCH LEVER PIVOT RIVETS ARE SUSCEPTIBLE TO DISTORTION. THE DISTORTED ASSEMBLIES ALLOW THE SEAT BACK RELEASE LATCH LEVER TO REMAIN IN THE RELEASED POSITION WHICH IS IN NON-COMPLIANCE WITH FMVSS NO. 207, "SEATING SYSTEMS." Recall Details
Problem: THE FRONT SUSPENSION TRACK BAR HAS INADEQUATE FATIGUE STRENGTH. Recall Details
Problem: THE FRONT SUSPENSION TRACK BAR BRACKET ATTACHMENT HAS INADEQUATE FATIGUE STRENGTH AND CAN FAIL, CAUSING FRONT AXLE VIBRATION. Recall Details
Problem: THE CINCH BAR COMPONENT WITHIN THE PASSENGER SIDE SAFETY BELT BUCKLE ASSEMBLY SHATTERS CAUSING THE BELT TO RELEASE. Recall Details
|