2002 NISSAN PATHFINDER RECALL - #10V312000
RECALL FOR AIR BAGS : FRONTAL
NISSAN IS RECALLING FORTY-SIX CERTAIN MODEL YEAR 2002 PATHFINDER AND INFINITI QX4 VEHICLES MANUFACTURED FROM AUGUST 24, 2001 THROUGH AUGUST 28, 2001. THE AIR BAG INFLATOR CONTAINS PROPELLANT WAFERS THAT ARE REQUIRED TO PROPERLY DEPLOY THE FRONT PASSENGER AIR BAG. DUE TO IMPROPER PROPELLANT WAFER INSTALLATION DURING THE AIR BAG INFLATOR ASSEMBLY PROCESS, SOME AIR BAG INFLATORS MAY BE MISSING ONE OF THE WAFERS. AS A RESULT, THE REMAINING WAFERS IN THE INFLATOR USED FOR THE DEPLOYMENT OF THE FRONT PASSENGER AIR BAG MAY, OVER TIME, BREAK UP INTO POWDER DUE TO NORMAL VIBRATION EXPERIENCED WHILE DRIVING. THIS CAUSES THE COMBUSTION RATE OF THE PROPELLANT TO INCREASE INSIDE THE INFLATOR, WHICH CAN LEAD TO INTERNAL PRESSURE RISING SUDDENLY DURING AIR BAG DEPLOYMENT.
Information provided by the
National Highway Traffic Safety Administration.
•
Send to a friend
•
Hide Form
Recall Details
| Vehicle |
2002 NISSAN PATHFINDER |
|
| Manufacturer |
NISSAN NORTH AMERICA, INC. |
| Manufactured between |
8/24/2001 - 8/28/2001 |
| Recalled on |
7/7/2010 |
| Influenced by |
NISSAN NORTH AMERICA, INC. |
| Owners Notified on |
8/19/2010 |
| # Affected |
46 |
| Recalled for |
AIR BAGS:FRONTAL |
|
|
| Description |
NISSAN IS RECALLING FORTY-SIX CERTAIN MODEL YEAR 2002 PATHFINDER AND INFINITI QX4 VEHICLES MANUFACTURED FROM AUGUST 24, 2001 THROUGH AUGUST 28, 2001. THE AIR BAG INFLATOR CONTAINS PROPELLANT WAFERS THAT ARE REQUIRED TO PROPERLY DEPLOY THE FRONT PASSENGER AIR BAG. DUE TO IMPROPER PROPELLANT WAFER INSTALLATION DURING THE AIR BAG INFLATOR ASSEMBLY PROCESS, SOME AIR BAG INFLATORS MAY BE MISSING ONE OF THE WAFERS. AS A RESULT, THE REMAINING WAFERS IN THE INFLATOR USED FOR THE DEPLOYMENT OF THE FRONT PASSENGER AIR BAG MAY, OVER TIME, BREAK UP INTO POWDER DUE TO NORMAL VIBRATION EXPERIENCED WHILE DRIVING. THIS CAUSES THE COMBUSTION RATE OF THE PROPELLANT TO INCREASE INSIDE THE INFLATOR, WHICH CAN LEAD TO INTERNAL PRESSURE RISING SUDDENLY DURING AIR BAG DEPLOYMENT. |
| Consequences |
THE INFLATOR HOUSING MAY RUPTURE AND PIECES OF THE INFLATOR COULD STRIKE AND INJURE VEHICLE OCCUPANTS. |
| Corrective action |
NISSAN WILL NOTIFY THE OWNERS OF THE FORTY-SIX AFFECTED VEHICLES. DEALERS WILL REPLACE THE FRONT PASSENGER AIR BAG MODULE ASSEMBLY WITH A NEW ONE FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 19, 2010. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261 AND INFINITI AT 1-800-662-6200. |
| Notes |
OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV . |
| See also |
2002 NISSAN PATHFINDER Recall for STEERING, COLUMN
2002 NISSAN PATHFINDER Recall for SUSPENSION, FRONT
2002 NISSAN PATHFINDER Recall for AIR BAGS
2002 NISSAN PATHFINDER Recall for AIR BAGS, FRONTAL, PASSENGER SIDE, INFLATOR MODULE
2002 NISSAN PATHFINDER Recall for AIR BAGS, FRONTAL, PASSENGER SIDE, INFLATOR MODULE
|
| Technical Service Bulletins |
May 10, 2021 - 010000 STEERING
If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut P
May 10, 2021 - 010000 STEERING
SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake incidents fall into
May 10, 2021 - 020000 SUSPENSION
SERVICE INFORMATION This bulletin provides information to identify: - A leaking strut or a shock absorber that qualifies for replacement under warranty. - A strut or shock absorber that has slight oil seepage, a condition wh
May 10, 2021 - 020000 SUSPENSION
SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake incidents fall into
May 10, 2021 - 030000 BRAKES (PWS)
If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut P
View all Technical Service Bulletins
|
|