Nissan Quest Recall for Seats Problem - (8 Recalls Found)
Find your car listed below. Results are sorted year from newest to oldest. Select the desired vehicle to view the complete details.
Information provided by the National Highway Traffic Safety Administration.
|
|
|
Problem: NISSAN IS RECALLING 1,126 MY 2008 QUEST, TITAN AND ARMADA VEHICLES EQUIPPED WITH MANUAL ADJUSTMENT FRONT SEATS. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207, "SEATING SYSTEMS." THE SEAT TRACK ASSEMBLY MAY HAVE BEEN MANUFACTURED OUT OF SPECIFICATION. Recall Details
Problem: ON CERTAIN MINI VANS, THERE IS A SEAT ADJUSTMENT MECHANISM THAT CONTAINS EXPOSED MOVING COMPONENTS LOCATED AT THE REAR INSIDE EDGE OF THE SECOND ROW SEAT. Recall Details
Problem: ON CERTAIN MINI VANS EQUIPPED WITH A FOLDING THIRD ROW REAR SEAT, WHEN THE THIRD ROW SEAT IS RAISED FROM ITS STOWED POSITION, IT ENGAGES STRIKER BRACKETS, ONE ON EACH SIDE OF THE SEAT CUSHION. THE FOLD-AWAY STRIKER LOOP IS WELDED TO A MOUNTING BRACKET. THE STRIKER MAY BECOME DETACHED FROM ITS MOUNTING BRACKET DUE TO A BROKEN WELD AT THE POINT OF ATTACHMENT TO THE BRACKET. Recall Details
Problem: ON CERTAIN MINI VANS, THERE IS A SEAT ADJUSTMENT MECHANISM THAT CONTAINS EXPOSED MOVING COMPONENTS LOCATED AT THE REAR INSIDE EDGE OF THE SECOND ROW SEAT. Recall Details
Problem: ON CERTAIN MINI VANS, THERE IS A SEAT ADJUSTMENT MECHANISM THAT CONTAINS EXPOSED MOVING COMPONENTS LOCATED AT THE REAR INSIDE EDGE OF THE SECOND ROW SEAT. Recall Details
Problem: ON CERTAIN MINI VANS EQUIPPED WITH A FOLDING THIRD ROW REAR SEAT, WHEN THE THIRD ROW SEAT IS RAISED FROM ITS STOWED POSITION, IT ENGAGES STRIKER BRACKETS, ONE ON EACH SIDE OF THE SEAT CUSHION. THE FOLD-AWAY STRIKER LOOP IS WELDED TO A MOUNTING BRACKET. THE STRIKER MAY BECOME DETACHED FROM ITS MOUNTING BRACKET DUE TO A BROKEN WELD AT THE POINT OF ATTACHMENT TO THE BRACKET. Recall Details
Problem: VEHICLE DESCRIPTION: MINI VANS EQUIPPED WITH E-Z ENTRY SEATS. THE AFFECTED VEHICLES MAY HAVE A SECOND ROW RIGHT HAND SIDE CAPTAIN CHAIR THAT HAS INADEQUATE LUBRICATION OF THE EASY ENTRY AND EXIT LATCH SYSTEM. IN SOME CASES, THE ACTUATOR SPRING IN THE LATCH COULD DEFORM AFTER REPEATED USE, CAUSING THE LATCH TO REMAIN IN THE UNLATCHED POSITION. IF THIS OCCURS, THE SEAT WILL SLIDE FREELY ON THE SEAT TRACK AND THE SPRINGS ON THE TRACK WILL MOVE THE SEAT TO THE EASY ENTRY POSITION TOWARD THE FRONT OF THE VEHICLE. Recall Details
Problem: AN OUT-OF-SPECIFICATION CONDITION IN THE SEAT CABLE ROLLER PULLEY ASSEMBLY CAN ALLOW THE CABLE THAT CONNECTS THE SEAT ADJUST LEVER TO THE LATCH TO BE PINCHED IN THE ROLLER ASSEMBLY. Recall Details
|