Auto Recalls for Consumers

FORD L800 Recalls - View the latest FORD L800 Recalls from the NHTSA

 
Auto Recalls For Consumers
by Ford Motor Company

FORD L800 RECALLS - (19 Recalls Found)

Find your vehicle listed below. Results are sorted year from newest to oldest. Select the desired vehicle to view the complete details. Information provided by the National Highway Traffic Safety Administration.
Subscribe to RSS Feed


1994 FORD L800 Recall - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY

Problem: THE LABELS REMINDING OPERATORS CLOSING THE FUEL TANK CROSSOVER VALVES TO REOPEN THE VALVES BEFORE OPERATING THE ENGINES WERE OMITTED. IF THE TANKS ARE OVER HALF FULL AND VEHICLE OPERATION WAS RESUMED WITHOUT REOPENING THE FUEL TANK CROSS-OVER VALVES, PRESSURE COULD BUILD IN ONE OF THE TANKS.Recall Details

1993 FORD L800 Recall - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY

Problem: THE LABELS REMINDING OPERATORS CLOSING THE FUEL TANK CROSSOVER VALVES TO REOPEN THE VALVES BEFORE OPERATING THE ENGINES WERE OMITTED. IF THE TANKS ARE OVER HALF FULL AND VEHICLE OPERATION WAS RESUMED WITHOUT REOPENING THE FUEL TANK CROSS-OVER VALVES, PRESSURE COULD BUILD IN ONE OF THE TANKS.Recall Details

1992 FORD L800 Recall - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY

Problem: THE LABELS REMINDING OPERATORS CLOSING THE FUEL TANK CROSSOVER VALVES TO REOPEN THE VALVES BEFORE OPERATING THE ENGINES WERE OMITTED. IF THE TANKS ARE OVER HALF FULL AND VEHICLE OPERATION WAS RESUMED WITHOUT REOPENING THE FUEL TANK CROSS-OVER VALVES, PRESSURE COULD BUILD IN ONE OF THE TANKS.Recall Details

1991 FORD L800 Recall - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY

Problem: THE LABELS REMINDING OPERATORS CLOSING THE FUEL TANK CROSSOVER VALVES TO REOPEN THE VALVES BEFORE OPERATING THE ENGINES WERE OMITTED. IF THE TANKS ARE OVER HALF FULL AND VEHICLE OPERATION WAS RESUMED WITHOUT REOPENING THE FUEL TANK CROSS-OVER VALVES, PRESSURE COULD BUILD IN ONE OF THE TANKS.Recall Details

1978 FORD L800 Recall - SEAT BELTS:FRONT:ANCHORAGE

Problem: THE SEAT BELTS ON THE INVOLVED VEHICLES FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NOS. 208, "OCCUPANT CRASH PROTECTION", AND 209, "SEAT BELT ASSEMBLIES". THE NON-CONFORMITY EXISTS BECAUSE WHEN THE DRIVER"S SEAT IS ADJUSTED TO THE FULL FORWARD POSITION, THE SEAT CUSHION IS ADJUSTED TO MAXIMUM ELEVATION, AND THE SEAT BACK IS TILTED TO THE FULLY UPRIGHT POSITION, THE SEAT BELTS ARE NOT LONG ENOUGH TO ACCOMMODATE SOME DRIVERS.Recall Details

1977 FORD L800 Recall - SEAT BELTS:FRONT:ANCHORAGE

Problem: THE SEAT BELTS ON THE INVOLVED VEHICLES FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NOS. 208, "OCCUPANT CRASH PROTECTION", AND 209, "SEAT BELT ASSEMBLIES". THE NON-CONFORMITY EXISTS BECAUSE WHEN THE DRIVER"S SEAT IS ADJUSTED TO THE FULL FORWARD POSITION, THE SEAT CUSHION IS ADJUSTED TO MAXIMUM ELEVATION, AND THE SEAT BACK IS TILTED TO THE FULLY UPRIGHT POSITION, THE SEAT BELTS ARE NOT LONG ENOUGH TO ACCOMMODATE SOME DRIVERS.Recall Details

1977 FORD L800 Recall - ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN

Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING.Recall Details

1976 FORD L800 Recall - SEAT BELTS:FRONT:ANCHORAGE

Problem: THE SEAT BELTS ON THE INVOLVED VEHICLES FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NOS. 208, "OCCUPANT CRASH PROTECTION", AND 209, "SEAT BELT ASSEMBLIES". THE NON-CONFORMITY EXISTS BECAUSE WHEN THE DRIVER"S SEAT IS ADJUSTED TO THE FULL FORWARD POSITION, THE SEAT CUSHION IS ADJUSTED TO MAXIMUM ELEVATION, AND THE SEAT BACK IS TILTED TO THE FULLY UPRIGHT POSITION, THE SEAT BELTS ARE NOT LONG ENOUGH TO ACCOMMODATE SOME DRIVERS.Recall Details

1976 FORD L800 Recall - ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN

Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING.Recall Details

1975 FORD L800 Recall - ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN

Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING.Recall Details

1975 FORD L800 Recall - SEAT BELTS:FRONT:ANCHORAGE

Problem: THE SEAT BELTS ON THE INVOLVED VEHICLES FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NOS. 208, "OCCUPANT CRASH PROTECTION", AND 209, "SEAT BELT ASSEMBLIES". THE NON-CONFORMITY EXISTS BECAUSE WHEN THE DRIVER"S SEAT IS ADJUSTED TO THE FULL FORWARD POSITION, THE SEAT CUSHION IS ADJUSTED TO MAXIMUM ELEVATION, AND THE SEAT BACK IS TILTED TO THE FULLY UPRIGHT POSITION, THE SEAT BELTS ARE NOT LONG ENOUGH TO ACCOMMODATE SOME DRIVERS.Recall Details

1974 FORD L800 Recall - SEAT BELTS:FRONT:ANCHORAGE

Problem: THE SEAT BELTS ON THE INVOLVED VEHICLES FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NOS. 208, "OCCUPANT CRASH PROTECTION", AND 209, "SEAT BELT ASSEMBLIES". THE NON-CONFORMITY EXISTS BECAUSE WHEN THE DRIVER"S SEAT IS ADJUSTED TO THE FULL FORWARD POSITION, THE SEAT CUSHION IS ADJUSTED TO MAXIMUM ELEVATION, AND THE SEAT BACK IS TILTED TO THE FULLY UPRIGHT POSITION, THE SEAT BELTS ARE NOT LONG ENOUGH TO ACCOMMODATE SOME DRIVERS.Recall Details

1974 FORD L800 Recall - ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN

Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING.Recall Details

1973 FORD L800 Recall - ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN

Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING.Recall Details

1973 FORD L800 Recall - SEAT BELTS:FRONT:ANCHORAGE

Problem: THE SEAT BELTS ON THE INVOLVED VEHICLES FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NOS. 208, "OCCUPANT CRASH PROTECTION", AND 209, "SEAT BELT ASSEMBLIES". THE NON-CONFORMITY EXISTS BECAUSE WHEN THE DRIVER"S SEAT IS ADJUSTED TO THE FULL FORWARD POSITION, THE SEAT CUSHION IS ADJUSTED TO MAXIMUM ELEVATION, AND THE SEAT BACK IS TILTED TO THE FULLY UPRIGHT POSITION, THE SEAT BELTS ARE NOT LONG ENOUGH TO ACCOMMODATE SOME DRIVERS.Recall Details

1972 FORD L800 Recall - SEAT BELTS:FRONT:ANCHORAGE

Problem: THE SEAT BELTS ON THE INVOLVED VEHICLES FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NOS. 208, "OCCUPANT CRASH PROTECTION", AND 209, "SEAT BELT ASSEMBLIES". THE NON-CONFORMITY EXISTS BECAUSE WHEN THE DRIVER"S SEAT IS ADJUSTED TO THE FULL FORWARD POSITION, THE SEAT CUSHION IS ADJUSTED TO MAXIMUM ELEVATION, AND THE SEAT BACK IS TILTED TO THE FULLY UPRIGHT POSITION, THE SEAT BELTS ARE NOT LONG ENOUGH TO ACCOMMODATE SOME DRIVERS.Recall Details

1972 FORD L800 Recall - ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN

Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING.Recall Details

1971 FORD L800 Recall - ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN

Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING.Recall Details

1970 FORD L800 Recall - ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN

Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING.Recall Details
Home  •  Car Recalls  •  Tires  •  Motorcycles  •  RVs  •  Commercial Vehicles  •  Car Seats  •  Complaints  •  Sitemap  •  Privacy Policy

Edmunds  •  Kelley Blue Book  •  SaferCar.gov  •  Consumer Recalls  •  Government Recalls
Follow arfc_recalls on TwitterRSS Feeds