FORD L9000 Recalls - View the latest FORD L9000 Recalls from the NHTSA

Auto Recalls For Consumers

Car Recalls

Tire Recalls

Motorcycle Recalls

RV Recalls

Commercial Vehicles

Child Car Seats

Complaints

Search

|

Alerts

FORD L9000 RECALLS - (19 Recalls Found)

Find your vehicle listed below. Results are sorted year from newest to oldest. Select the desired vehicle to view the complete details. Information provided by the National Highway Traffic Safety Administration.

---

1995 FORD L9000 Recall - EXTERIOR LIGHTING:BRAKE LIGHTS Problem: Stainless & Repair, Inc. (Stainless & Repair) is recalling certain 2016-2017 Freightliner M2-112 and 1994-1995 Ford L9000 vehicles equipped with Whelen brake lights. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed.  Recall Details 1994 FORD L9000 Recall - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY Problem: THE LABELS REMINDING OPERATORS CLOSING THE FUEL TANK CROSSOVER VALVES TO REOPEN THE VALVES BEFORE OPERATING THE ENGINES WERE OMITTED. IF THE TANKS ARE OVER HALF FULL AND VEHICLE OPERATION WAS RESUMED WITHOUT REOPENING THE FUEL TANK CROSS-OVER VALVES, PRESSURE COULD BUILD IN ONE OF THE TANKS. Recall Details 1994 FORD L9000 Recall - EXTERIOR LIGHTING:BRAKE LIGHTS Problem: Stainless & Repair, Inc. (Stainless & Repair) is recalling certain 2016-2017 Freightliner M2-112 and 1994-1995 Ford L9000 vehicles equipped with Whelen brake lights. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed.  Recall Details 1993 FORD L9000 Recall - WHEELS Problem:  Recall Details 1993 FORD L9000 Recall - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY Problem: THE LABELS REMINDING OPERATORS CLOSING THE FUEL TANK CROSSOVER VALVES TO REOPEN THE VALVES BEFORE OPERATING THE ENGINES WERE OMITTED. IF THE TANKS ARE OVER HALF FULL AND VEHICLE OPERATION WAS RESUMED WITHOUT REOPENING THE FUEL TANK CROSS-OVER VALVES, PRESSURE COULD BUILD IN ONE OF THE TANKS. Recall Details 1992 FORD L9000 Recall - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY Problem: THE LABELS REMINDING OPERATORS CLOSING THE FUEL TANK CROSSOVER VALVES TO REOPEN THE VALVES BEFORE OPERATING THE ENGINES WERE OMITTED. IF THE TANKS ARE OVER HALF FULL AND VEHICLE OPERATION WAS RESUMED WITHOUT REOPENING THE FUEL TANK CROSS-OVER VALVES, PRESSURE COULD BUILD IN ONE OF THE TANKS. Recall Details 1991 FORD L9000 Recall - FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY Problem: THE LABELS REMINDING OPERATORS CLOSING THE FUEL TANK CROSSOVER VALVES TO REOPEN THE VALVES BEFORE OPERATING THE ENGINES WERE OMITTED. IF THE TANKS ARE OVER HALF FULL AND VEHICLE OPERATION WAS RESUMED WITHOUT REOPENING THE FUEL TANK CROSS-OVER VALVES, PRESSURE COULD BUILD IN ONE OF THE TANKS. Recall Details 1990 FORD L9000 Recall - SERVICE BRAKES, AIR:CONTROLS Problem: SECONDARY SERVICE RESERVOIR AIR CHECK VALVES MAY NOT SEAT PROPERLY DUE TO A MECHANICAL INTERFERENCE CONDITION BETWEEN A CIRCULAR BRASS GUIDE AND THE WALL OF A CYLINDRICAL FERRULE IN WHICH THE BRASS GUIDE IS INTENDED TO MOVE FREELY. Recall Details 1989 FORD L9000 Recall - SERVICE BRAKES, AIR:CONTROLS Problem: SECONDARY SERVICE RESERVOIR AIR CHECK VALVES MAY NOT SEAT PROPERLY DUE TO A MECHANICAL INTERFERENCE CONDITION BETWEEN A CIRCULAR BRASS GUIDE AND THE WALL OF A CYLINDRICAL FERRULE IN WHICH THE BRASS GUIDE IS INTENDED TO MOVE FREELY. Recall Details 1986 FORD L9000 Recall - VEHICLE SPEED CONTROL Problem: HAND THROTTLE CONTROLS WERE NOT IDENTIFIED EITHER ON THE CONTROL KNOB OR ON THE INSTRUMENT PANEL AS REQUIRED BY FMVSS 101. CONSEQUENCE OF DEFECT: TRUCKS ARE NOT IN COMPLIANCE WITH FMVSS 101, CONTROLS AND DISPLAYS. Recall Details 1985 FORD L9000 Recall - VEHICLE SPEED CONTROL Problem: HAND THROTTLE CONTROLS WERE NOT IDENTIFIED EITHER ON THE CONTROL KNOB OR ON THE INSTRUMENT PANEL AS REQUIRED BY FMVSS 101. CONSEQUENCE OF DEFECT: TRUCKS ARE NOT IN COMPLIANCE WITH FMVSS 101, CONTROLS AND DISPLAYS. Recall Details 1984 FORD L9000 Recall - VEHICLE SPEED CONTROL Problem: HAND THROTTLE CONTROLS WERE NOT IDENTIFIED EITHER ON THE CONTROL KNOB OR ON THE INSTRUMENT PANEL AS REQUIRED BY FMVSS 101. CONSEQUENCE OF DEFECT: TRUCKS ARE NOT IN COMPLIANCE WITH FMVSS 101, CONTROLS AND DISPLAYS. Recall Details 1978 FORD L9000 Recall - SEAT BELTS:FRONT:ANCHORAGE Problem: THE SEAT BELTS ON THE INVOLVED VEHICLES FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NOS. 208, "OCCUPANT CRASH PROTECTION", AND 209, "SEAT BELT ASSEMBLIES". THE NON-CONFORMITY EXISTS BECAUSE WHEN THE DRIVER"S SEAT IS ADJUSTED TO THE FULL FORWARD POSITION, THE SEAT CUSHION IS ADJUSTED TO MAXIMUM ELEVATION, AND THE SEAT BACK IS TILTED TO THE FULLY UPRIGHT POSITION, THE SEAT BELTS ARE NOT LONG ENOUGH TO ACCOMMODATE SOME DRIVERS. Recall Details 1977 FORD L9000 Recall - SEAT BELTS:FRONT:ANCHORAGE Problem: THE SEAT BELTS ON THE INVOLVED VEHICLES FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NOS. 208, "OCCUPANT CRASH PROTECTION", AND 209, "SEAT BELT ASSEMBLIES". THE NON-CONFORMITY EXISTS BECAUSE WHEN THE DRIVER"S SEAT IS ADJUSTED TO THE FULL FORWARD POSITION, THE SEAT CUSHION IS ADJUSTED TO MAXIMUM ELEVATION, AND THE SEAT BACK IS TILTED TO THE FULLY UPRIGHT POSITION, THE SEAT BELTS ARE NOT LONG ENOUGH TO ACCOMMODATE SOME DRIVERS. Recall Details 1976 FORD L9000 Recall - SEAT BELTS:FRONT:ANCHORAGE Problem: THE SEAT BELTS ON THE INVOLVED VEHICLES FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NOS. 208, "OCCUPANT CRASH PROTECTION", AND 209, "SEAT BELT ASSEMBLIES". THE NON-CONFORMITY EXISTS BECAUSE WHEN THE DRIVER"S SEAT IS ADJUSTED TO THE FULL FORWARD POSITION, THE SEAT CUSHION IS ADJUSTED TO MAXIMUM ELEVATION, AND THE SEAT BACK IS TILTED TO THE FULLY UPRIGHT POSITION, THE SEAT BELTS ARE NOT LONG ENOUGH TO ACCOMMODATE SOME DRIVERS. Recall Details 1975 FORD L9000 Recall - SEAT BELTS:FRONT:ANCHORAGE Problem: THE SEAT BELTS ON THE INVOLVED VEHICLES FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NOS. 208, "OCCUPANT CRASH PROTECTION", AND 209, "SEAT BELT ASSEMBLIES". THE NON-CONFORMITY EXISTS BECAUSE WHEN THE DRIVER"S SEAT IS ADJUSTED TO THE FULL FORWARD POSITION, THE SEAT CUSHION IS ADJUSTED TO MAXIMUM ELEVATION, AND THE SEAT BACK IS TILTED TO THE FULLY UPRIGHT POSITION, THE SEAT BELTS ARE NOT LONG ENOUGH TO ACCOMMODATE SOME DRIVERS. Recall Details 1974 FORD L9000 Recall - SEAT BELTS:FRONT:ANCHORAGE Problem: THE SEAT BELTS ON THE INVOLVED VEHICLES FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NOS. 208, "OCCUPANT CRASH PROTECTION", AND 209, "SEAT BELT ASSEMBLIES". THE NON-CONFORMITY EXISTS BECAUSE WHEN THE DRIVER"S SEAT IS ADJUSTED TO THE FULL FORWARD POSITION, THE SEAT CUSHION IS ADJUSTED TO MAXIMUM ELEVATION, AND THE SEAT BACK IS TILTED TO THE FULLY UPRIGHT POSITION, THE SEAT BELTS ARE NOT LONG ENOUGH TO ACCOMMODATE SOME DRIVERS. Recall Details 1973 FORD L9000 Recall - SEAT BELTS:FRONT:ANCHORAGE Problem: THE SEAT BELTS ON THE INVOLVED VEHICLES FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NOS. 208, "OCCUPANT CRASH PROTECTION", AND 209, "SEAT BELT ASSEMBLIES". THE NON-CONFORMITY EXISTS BECAUSE WHEN THE DRIVER"S SEAT IS ADJUSTED TO THE FULL FORWARD POSITION, THE SEAT CUSHION IS ADJUSTED TO MAXIMUM ELEVATION, AND THE SEAT BACK IS TILTED TO THE FULLY UPRIGHT POSITION, THE SEAT BELTS ARE NOT LONG ENOUGH TO ACCOMMODATE SOME DRIVERS. Recall Details 1972 FORD L9000 Recall - SEAT BELTS:FRONT:ANCHORAGE Problem: THE SEAT BELTS ON THE INVOLVED VEHICLES FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NOS. 208, "OCCUPANT CRASH PROTECTION", AND 209, "SEAT BELT ASSEMBLIES". THE NON-CONFORMITY EXISTS BECAUSE WHEN THE DRIVER"S SEAT IS ADJUSTED TO THE FULL FORWARD POSITION, THE SEAT CUSHION IS ADJUSTED TO MAXIMUM ELEVATION, AND THE SEAT BACK IS TILTED TO THE FULLY UPRIGHT POSITION, THE SEAT BELTS ARE NOT LONG ENOUGH TO ACCOMMODATE SOME DRIVERS. Recall Details