http://www.arfc.org/rss/feeds/autos/international_harvester/8200The latest automotive recalls from the National Highway Transportation Safety AdministrationThu, 02 May 2024 15:18:17 GMTen-us1440Copyright 2024, Eladrel Technologies, LLCAutomotiveVEHICLE DESCRIPTION: SCHOOL BUSES AND HEAVY DUTY TRUCKS EQUIPPED WITH REAR AXLE ASSEMBLIES PRODUCED BY DANA SPICER. CERTAIN REAR AXLE ASSEMBLIES WERE IMPROPERLY HEAT TREATED WHICH COULD ALLOW PINION BREAKAGE AT THE PINION THREADS.http://www.arfc.org/commercial/international_harvester/8200/recalls/000008022000074810000000045/recall.aspxWed, 27 Nov 1996 00:00:00 GMTTHE DRIVE AXLE HOUSINGS CONSIST OF A PLATE STEEL CENTER SECTION AND TWO FORGED SPINDLES, ONE OF WHICH IS WELDED TO EACH END OF THE CENTER SECTION. EACH SPINDLE CONTAINS A KEYWAY SLOT IN WHICH THE LOCKING TAB FOR THE WHEEL BEARING NUT LOCKING MECHANISM IS INSERTED. THE LENGTH OF THE KEYWAY SLOT MAY NOT BE LONG ENOUGH TO ACCOMMODATE THE TAB CAUSING THE TAB TO BE DEFORMED OR DAMAGED DURING INSTALLATION.http://www.arfc.org/commercial/international_harvester/8200/recalls/000008049000075801000000045/recall.aspxFri, 22 Nov 1996 00:00:00 GMTTHESE VEHICLES WERE BUILT WITH AN IMPROPERLY PLUMBED BRAKE SYSTEM WHICH AFFECTS THE BRAKING ON THE REAR AXLE WHEN RUNNING EITHER BOBTAIL OR PULLING A TRAILER.http://www.arfc.org/commercial/international_harvester/8200/recalls/000007430000061374000000073/recall.aspxWed, 02 Aug 1995 00:00:00 GMTTHESE VEHICLES WERE BUILT WITH AN IMPROPERLY PLUMBED BRAKE SYSTEM WHICH AFFECTS THE BRAKING ON THE REAR AXLE WHEN RUNNING EITHER BOBTAIL OR PULLING A TRAILER.http://www.arfc.org/commercial/international_harvester/8200/recalls/000007430000016100000000073/recall.aspxWed, 02 Aug 1995 00:00:00 GMTTHE BASE OF THE ELECTRONIC ACCELERATOR PEDAL IS MADE OF DIE CAST ALUMINUM. THE BASE MOUNTS DIRECTLY TO THE CAB FIREWALL. THE CAB FIREWALL IS NOT RIGID ENOUGH OR FLAT ENOUGH AT THE MOUNTING SURFACE, CAUSING STRESS ON THE ACCELERATOR BASE THAT WILL CAUSE THE MOUNTING PADS ON THE BASE OF THE PEDAL ASSEMBLY TO FAIL AND TOTALLY SEPARATE FROM THE FIREWALL.http://www.arfc.org/commercial/international_harvester/8200/recalls/000007177000016100000000295/recall.aspxFri, 07 Oct 1994 00:00:00 GMTTHE BASE OF THE ELECTRONIC ACCELERATOR PEDAL IS MADE OF DIE CAST ALUMINUM. THE BASE MOUNTS DIRECTLY TO THE CAB FIREWALL. THE CAB FIREWALL IS NOT RIGID ENOUGH OR FLAT ENOUGH AT THE MOUNTING SURFACE, CAUSING STRESS ON THE ACCELERATOR BASE THAT WILL CAUSE THE MOUNTING PADS ON THE BASE OF THE PEDAL ASSEMBLY TO FAIL AND TOTALLY SEPARATE FROM THE FIREWALL.http://www.arfc.org/commercial/international_harvester/8200/recalls/000007177000016099000000295/recall.aspxFri, 07 Oct 1994 00:00:00 GMT