|
2021 Recalls ↓
Problem: General Motors, LLC (GM) is recalling certain 2020 Chevrolet Bolt EV and 2021 GMC Canyon and Sierra 1500, 2500 and 3500, Yukon, Yukon XL, Cadillac Escalade and Escalade ESV and Chevrolet Blazer, Camaro, Colorado, Equinox, Silverado 1500, 2500 and 3500, Suburban and Tahoe vehicles. Incorrect bolts may have been used at one or more fastening locations to secure the seat belts to the vehicle. If an incorrect bolt was used, the seat belt may not be properly attached to the vehicle. Recall Details - 12/23/2020
Problem: General Motors, LLC (GM) is recalling certain 2020 Chevrolet Bolt EV and 2021 GMC Canyon and Sierra 1500, 2500 and 3500, Yukon, Yukon XL, Cadillac Escalade and Escalade ESV and Chevrolet Blazer, Camaro, Colorado, Equinox, Silverado 1500, 2500 and 3500, Suburban and Tahoe vehicles. Incorrect bolts may have been used at one or more fastening locations to secure the seat belts to the vehicle. If an incorrect bolt was used, the seat belt may not be properly attached to the vehicle. Recall Details - 12/23/2020
Problem: General Motors, LLC (GM) is recalling certain 2021 Chevrolet Camaro vehicles. The left or right axle shaft may be missing a retaining ring, which could allow the axle shaft to separate while driving. Recall Details - 3/18/2021
Problem: General Motors, LLC (GM) is recalling certain 2017-2021 Chevrolet Camaro vehicles. The plastic "Camaro" emblem, located on the steering wheel air bag cover, may separate during deployment of the frontal driver air bag. Recall Details - 3/25/2021
2020 Recalls ↓
Problem: General Motors, LLC (GM) is recalling certain 2017-2021 Chevrolet Camaro vehicles. The plastic "Camaro" emblem, located on the steering wheel air bag cover, may separate during deployment of the frontal driver air bag. Recall Details - 3/25/2021
Problem: General Motors LLC (GM) is recalling certain 2020 Cadillac Escalade, Escalade ESV, Chevrolet Camaro, Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, Yukon, and Yukon XL vehicles. The fuel pump may be missing a pressure regulator, allowing for over-pressurization of the fuel system. Recall Details - 11/21/2019
2019 Recalls ↓
Problem: General Motors, LLC (GM) is recalling certain 2017-2021 Chevrolet Camaro vehicles. The plastic "Camaro" emblem, located on the steering wheel air bag cover, may separate during deployment of the frontal driver air bag. Recall Details - 3/25/2021
2018 Recalls ↓
Problem: General Motors, LLC (GM) is recalling certain 2017-2021 Chevrolet Camaro vehicles. The plastic "Camaro" emblem, located on the steering wheel air bag cover, may separate during deployment of the frontal driver air bag. Recall Details - 3/25/2021
2017 Recalls ↓
Problem: General Motors LLC (GM) is recalling certain 2016-2018 Cadillac CTS, and 2017 Cadillac ATS, Chevrolet Camaro, and Chevrolet Corvette vehicles. The electric power steering (EPS) assist system may fail. Recall Details - 2/7/2019
Problem: General Motors, LLC (GM) is recalling certain 2017-2021 Chevrolet Camaro vehicles. The plastic "Camaro" emblem, located on the steering wheel air bag cover, may separate during deployment of the frontal driver air bag. Recall Details - 3/25/2021
2016 Recalls ↓
Problem: Genera Motors LLC (GM) is recalling certain model year 2016 Chevrolet Camaro, Malibu, Silverado and GMC Sierra vehicles. The radio may intermittently fail to provide an audio warning when the key has been left in the ignition and the door is opened or when the driver does not fasten their seat belt. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standards (FMVSS) number 114, "Theft Protection", and/or 208, "Occupant Crash Protection." Recall Details - 2/11/2016
2015 Recalls ↓
Problem: General Motors LLC (GM) is recalling certain model year 2015 Buick LaCrosse, Cadillac XTS, Chevrolet Camaro, Equinox, Malibu, and GMC Terrain vehicles. The affected vehicles have front seat-mounted side impact air bags whose inflator may rupture upon its deployment. Recall Details - 10/16/2015
2014 Recalls ↓
Problem: General Motors LLC (GM) is recalling all 2010-2014 Chevrolet Camaro vehicles manufactured December 3, 2008 to May 23, 2014. In the affected vehicles, the driver may accidentally hit the ignition key with their knee, unintentionally knocking the key out of the run position, turning off the engine. Recall Details - 6/20/2014
Problem: General Motors LLC (GM) is recalling certain model year 2014 Buick Regal, Cadillac XTS, Chevrolet Camaro and Chevrolet Impala vehicles. Improperly torqued fasteners may cause the steering intermediate shaft and the steering gear and/or the lower control arm and the lower ball joint to separate. Recall Details - 7/2/2014
Problem: General Motors (GM) is recalling certain model year 2013 and 2014 Chevrolet Camaro Coupes manufactured June 9, 2013, through September 6, 2013. In the affected vehicles, the required air bag warning label on the sun visor may peel off. Thus, these vehicles fail to comply to Federal Motor Vehicle Safety Standard No. 208 "Occupant Crash Protection." Recall Details - 9/26/2013
2013 Recalls ↓
Problem: General Motors (GM) is recalling certain model year 2013 and 2014 Chevrolet Camaro Coupes manufactured June 9, 2013, through September 6, 2013. In the affected vehicles, the required air bag warning label on the sun visor may peel off. Thus, these vehicles fail to comply to Federal Motor Vehicle Safety Standard No. 208 "Occupant Crash Protection." Recall Details - 9/26/2013
Problem: General Motors LLC (GM) is recalling all 2010-2014 Chevrolet Camaro vehicles manufactured December 3, 2008 to May 23, 2014. In the affected vehicles, the driver may accidentally hit the ignition key with their knee, unintentionally knocking the key out of the run position, turning off the engine. Recall Details - 6/20/2014
2012 Recalls ↓
Problem: General Motors LLC (GM) is recalling all 2010-2014 Chevrolet Camaro vehicles manufactured December 3, 2008 to May 23, 2014. In the affected vehicles, the driver may accidentally hit the ignition key with their knee, unintentionally knocking the key out of the run position, turning off the engine. Recall Details - 6/20/2014
Problem: General Motors LLC (GM) is recalling certain model year 2011-2012 Buick LaCrosse, Regal and Chevrolet Camaro, as well as certain 2010-2012 Cadillac SRX, Chevrolet Equinox and GMC Terrain vehicles, equipped with power height adjustable driver and passenger seats. In the affected vehicles, the bolt that secures the driver's and passenger's power front seat height adjuster may fall out causing the seat to drop suddenly to the lowest vertical position. Recall Details - 7/23/2014
Problem: General Motors LLC (GM) is recalling certain model year 2012 Buick Verano vehicles manufactured December 2, 2011 to July, 16, 2012, Chevrolet Cruze vehicles manufactured December 7, 2011 to July 25, 2012, Chevrolet Sonic vehicles manufactured December 5, 2011 to August 2, 2012, and Chevrolet Camaro vehicles manufactured December 1, 2011 to June 11, 2012. The driver side frontal air bag has a shorting bar which may intermittently contact the air bag terminals. Recall Details - 6/6/2014
Problem: General Motors LLC (GM) is recalling certain model year 2012 Chevrolet Camaro, Cruze and Sonic, and model year 2012 Buick Verano vehicles. The driver side frontal air bag has a shorting bar which may intermittently contact the air bag terminals. Recall Details - 1/24/2013
2011 Recalls ↓
Problem: General Motors LLC (GM) is recalling certain model year 2011-2012 Buick LaCrosse, Regal and Chevrolet Camaro, as well as certain 2010-2012 Cadillac SRX, Chevrolet Equinox and GMC Terrain vehicles, equipped with power height adjustable driver and passenger seats. In the affected vehicles, the bolt that secures the driver's and passenger's power front seat height adjuster may fall out causing the seat to drop suddenly to the lowest vertical position. Recall Details - 7/23/2014
Problem: General Motors LLC (GM) is recalling all 2010-2014 Chevrolet Camaro vehicles manufactured December 3, 2008 to May 23, 2014. In the affected vehicles, the driver may accidentally hit the ignition key with their knee, unintentionally knocking the key out of the run position, turning off the engine. Recall Details - 6/20/2014
2010 Recalls ↓
Problem: GM IS RECALLING 1,243 MY 2010 CHEVROLET CAMARO EQUIPPED WITH A V8 ENGINE. THE POSITIVE BATTERY CABLE MAY CONTACT THE STARTER MOTOR HOUSING AND CAUSE WEAR ON THE CABLE INSULATION. IF THE INSULATION WEARS THROUGH TO THE CABLE, IT COULD CREATE A SHORT. Recall Details - 5/6/2009
Problem: General Motors LLC (GM) is recalling all 2010-2014 Chevrolet Camaro vehicles manufactured December 3, 2008 to May 23, 2014. In the affected vehicles, the driver may accidentally hit the ignition key with their knee, unintentionally knocking the key out of the run position, turning off the engine. Recall Details - 6/20/2014
2002 Recalls ↓
Problem: VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS OF FMVSS NO. 208, "OCCUPANT CRASH PROTECTION," AND NO. 214, "SIDE IMPACT PROTECTION." THESE VEHICLES MAY HAVE WELDS NEAR THE LOWER DRIVER'S SIDE DOOR HINGE THAT DO NOT MEET SPECIFICATIONS. Recall Details - 12/12/2001
1999 Recalls ↓
Problem: VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH MANUAL TRANSMISSIONS. THE CLUTCH MASTER CYLINDER MAY HAVE BEEN BUILT WITH AN INCORRECT RETAINING RING. Recall Details - 8/27/1999
1997 Recalls ↓
Problem: THESE VEHICLES WERE MANUFACTURED WITH SEAT BELT RETRACTORS OUT OF DESIGN POSITION WHICH CAN CAUSE THE RETRACTOR TO LOCK-UP ON SLOPES LESS SEVERE THAN THE FMVSS REQUIREMENT. THIS DOES NOT COMPLY WITH FMVSS NO. 209, "SEAT BELT ASSEMBLIES." Recall Details - 11/4/1996
1995 Recalls ↓
Problem: THE STEERING INTERMEDIATE SHAFT COULD HAVE BEEN IMPROPERLY ASSEMBLED CAUSING THE SHAFT LOWER COUPLING TO LOOSEN AND ROTATE ON THE STEERING GEAR INPUT SHAFT. Recall Details - 3/22/1995
1994 Recalls ↓
Problem: THE FUEL LINES ON THESE VEHICLES MAY HAVE BEEN MISROUTED AND MAY CONTACT THE "AIR" CHECK VALVE. THE HIGH TEMPERATURES FROM THE "AIR" CHECK VALVE COULD ALLOW IT TO MELT THROUGH AND DAMAGE A FUEL LINE. Recall Details - 12/1/1993
1992 Recalls ↓
Problem: THE AUTOMATIC TRANSMISSION SHIFT CONTROL CABLE CAN SEPARATE. Recall Details - 10/23/1992
Problem: THE FUEL FILLER NECK SOLDER JOINT CAN DEVELOP CRACKS OR PIN HOLE LEAKS, WHICH DOES NOT COMPLY WITH FMVSS NO. 301, "FUEL SYSTEM INTEGRITY." THE CRACKS AND HOLES CAN ALLOW FUEL VAPOR AND FUEL LEAKAGE. Recall Details - 4/25/1994
1991 Recalls ↓
Problem: THE FUEL FILLER NECK SOLDER JOINT CAN DEVELOP CRACKS OR PIN HOLE LEAKS, WHICH DOES NOT COMPLY WITH FMVSS NO. 301, "FUEL SYSTEM INTEGRITY." THE CRACKS AND HOLES CAN ALLOW FUEL VAPOR AND FUEL LEAKAGE. Recall Details - 4/25/1994
Problem: THE METAL LATCHPLATES MAY NOT ENGAGE THE BUCKLE ASSEMBLIES, CAUSING A "NO LATCH" CONDITION. MOVEMENT OF THE SEAT OCCUPANT IN THIS CONDITION COULD CAUSE LATCHPLATE RELEASE FROM THE BUCKLE. Recall Details - 4/22/1991
Problem: THE FRONT SEAT UPPER HINGE COVER SCREWS ARE TOO LONG, AND INTERFERE WITH THE SEAT BACK INERTIA LOCK. THIS PREVENTS THE SEAT BACK FROM LOCKING PROPERLY. Recall Details - 5/3/1991
Problem: POOR BOND ADHESION BETWEEN THE WINDSHIELD GLASS AND THE MOUNTING, WHICH COULD ALLOW THE WINDSHIELD TO SEPARATE FROM THE VEHICLE DURING A COLLISION. THIS FAILS TO CONFORM WITH FMVSS 212. Recall Details - 2/19/1991
1990 Recalls ↓
Problem: PLASTIC COMPONENTS OF SEAT BELT BUCKLE ASSEMBLIES DO NOT CONTAIN AN ULTRA VIOLET STABILIZER, AND EXPOSURE TO DIRECT SUNLIGHT AND ELEVATED INTERIOR TEMPERATURES COULD WEAKEN THE PLASTIC COMPONENTS. Recall Details - 5/14/1990
Problem: FUEL RETURN HOSES MAY BREAK AT EITHER CRIMPED COUPLING. Recall Details - 6/12/1990
1989 Recalls ↓
Problem: PLASTIC COMPONENTS OF SEAT BELT BUCKLE ASSEMBLIES DO NOT CONTAIN AN ULTRA VIOLET STABILIZER, AND EXPOSURE TO DIRECT SUNLIGHT AND ELEVATED INTERIOR TEMPERATURES COULD WEAKEN THE PLASTIC COMPONENTS. Recall Details - 5/14/1990
Problem: FUEL FEED HOSES MAY PULL OUT OF THE CRIMPED COUPLING AT THE ENGINE END OF THE HOSE ASSEMBLY. Recall Details - 6/12/1990
Problem: WEBBING ON THE BUCKLE PORTION OF THE REAR LAP/SHOULDER BELTS MAY BE TOO LONG. Recall Details - 12/13/1988
1988 Recalls ↓
Problem: PLASTIC COMPONENTS OF SEAT BELT BUCKLE ASSEMBLIES DO NOT CONTAIN AN ULTRA VIOLET STABILIZER, AND EXPOSURE TO DIRECT SUNLIGHT AND ELEVATED INTERIOR TEMPERATURES COULD WEAKEN THE PLASTIC COMPONENTS. Recall Details - 5/14/1990
Problem: FUEL FEED HOSES MAY PULL OUT OF THE CRIMPED COUPLING AT THE ENGINE END OF THE HOSE ASSEMBLY. Recall Details - 6/12/1990
1987 Recalls ↓
Problem: PLASTIC COMPONENTS OF SEAT BELT BUCKLE ASSEMBLIES DO NOT CONTAIN AN ULTRA VIOLET STABILIZER, AND EXPOSURE TO DIRECT SUNLIGHT AND ELEVATED INTERIOR TEMPERATURES COULD WEAKEN THE PLASTIC COMPONENTS. Recall Details - 5/14/1990
1986 Recalls ↓
Problem: PLASTIC COMPONENTS OF SEAT BELT BUCKLE ASSEMBLIES DO NOT CONTAIN AN ULTRA VIOLET STABILIZER, AND EXPOSURE TO DIRECT SUNLIGHT AND ELEVATED INTERIOR TEMPERATURES COULD WEAKEN THE PLASTIC COMPONENTS. Recall Details - 5/14/1990
Problem: THE PUSH-PULL HEADLIGHT SWITCH MAY HAVE ELECTRICAL CONTACTS WHICH ALLOW AN INTERMITTENT HEADLIGHT CIRCUIT CAUSING HEADLIGHT TO FLICKER OR SUDDENLY GO OUT. CONSEQUENCE OF DEFECT: SUDDEN LOSS OF THE HEADLIGHTS UNDER SEVERE WEATHER OR NIGHTTIME DRIVING CONDITIONS COULD REDUCE DRIVER VISIBILITY WHICH MIGHT RESULT IN A VEHICLE CRASH WITHOUT PRIOR WARNING. NOTE: ALSO, SEE NHTSA CAMPAIGN NUMBER 86V131000. Recall Details - 4/28/1986
Problem: THE PUSH PULL HEADLIGHT SWITCH MAY HAVE ELECTRICAL CONTACTS WHICH ALLOW AN INTERMITTENT HEADLIGHT CIRCUIT CAUSING HEADLIGHT TO FLICKER OR SUDDENLY GO OUT. CONSEQUENCE OF DEFECT: SUDDEN LOSS OF THE HEADLIGHTS UNDER SEVERE WEATHER OR NIGHTTIME DRIVING CONDITIONS COULD REDUCE DRIVER VISIBILITY WHICH MIGHT RESULT IN A VEHICLE CRASH WITHOUT PRIOR WARNING. Recall Details - 9/19/1986
Problem: PARKING BRAKE ADJUSTER FAILS TO OPERATE AND DO NOT WORK AFTER BRAKE PAD WEAR. Recall Details - 4/11/1991
1985 Recalls ↓
Problem: PARKING BRAKE ADJUSTER FAILS TO OPERATE AND DO NOT WORK AFTER BRAKE PAD WEAR. Recall Details - 4/11/1991
Problem: PLASTIC COMPONENTS OF SEAT BELT BUCKLE ASSEMBLIES DO NOT CONTAIN AN ULTRA VIOLET STABILIZER, AND EXPOSURE TO DIRECT SUNLIGHT AND ELEVATED INTERIOR TEMPERATURES COULD WEAKEN THE PLASTIC COMPONENTS. Recall Details - 5/14/1990
Problem: DISLOCATION OF A SPRING COVER WILL NOT ALLOW THE SHOULDER BELT TO RETRACT AFTER BEING EXTENDED. CONSEQUENCE OF DEFECT: ALTHOUGH INERTIAL FEATURE THAT LOCKS THE LAP BELT AND SHOULDER BELT IN THE EVENT OF AN ACCIDENT ARE NOT AFFECTED, IF SLACK IS MORE THAN RECOMMENDED IN OWNERS MANUAL, INJURIES TO UPPER BODY AND HEAD WOULD BE INCREASED IN AN ACCIDENT. Recall Details - 12/20/1985
1984 Recalls ↓
Problem: DISLOCATION OF A SPRING COVER WILL NOT ALLOW THE SHOULDER BELT TO RETRACT AFTER BEING EXTENDED. CONSEQUENCE OF DEFECT: ALTHOUGH INERTIAL FEATURE THAT LOCKS THE LAP BELT AND SHOULDER BELT IN THE EVENT OF AN ACCIDENT ARE NOT AFFECTED, IF SLACK IS MORE THAN RECOMMENDED IN OWNERS MANUAL, INJURIES TO UPPER BODY AND HEAD WOULD BE INCREASED IN AN ACCIDENT. Recall Details - 12/20/1985
Problem: SOME VEHICLES HAVE BUCKET SEAT BACK LOCKS THAT DO NOT CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD 207, ANCHORAGE OF SEATS. IN EVENT OF A CRASH, THE SEAT BACK LOCK MAY NOT FUNCTION. Recall Details - 2/6/1984
Problem: REAR BRAKE HOSES WERE NOT PROPERLY MANUFACTURED AND DO NOT CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD 106, "BRAKE HOSES". HOSES COULD COME LOOSE FROM THE END FITTINGS WHEN SUBJECTED TO A PULLING FORCE. Recall Details - 8/17/1984
Problem: PLASTIC COMPONENTS OF SEAT BELT BUCKLE ASSEMBLIES DO NOT CONTAIN AN ULTRA VIOLET STABILIZER, AND EXPOSURE TO DIRECT SUNLIGHT AND ELEVATED INTERIOR TEMPERATURES COULD WEAKEN THE PLASTIC COMPONENTS. Recall Details - 5/14/1990
Problem: PARKING BRAKE ADJUSTER FAILS TO OPERATE AND DO NOT WORK AFTER BRAKE PAD WEAR. Recall Details - 4/11/1991
1983 Recalls ↓
Problem: PARKING BRAKE ADJUSTER FAILS TO OPERATE AND DO NOT WORK AFTER BRAKE PAD WEAR. Recall Details - 4/11/1991
Problem: DISLOCATION OF A SPRING COVER WILL NOT ALLOW THE SHOULDER BELT TO RETRACT AFTER BEING EXTENDED. CONSEQUENCE OF DEFECT: ALTHOUGH INERTIAL FEATURE THAT LOCKS THE LAP BELT AND SHOULDER BELT IN THE EVENT OF AN ACCIDENT ARE NOT AFFECTED, IF SLACK IS MORE THAN RECOMMENDED IN OWNERS MANUAL, INJURIES TO UPPER BODY AND HEAD WOULD BE INCREASED IN AN ACCIDENT. Recall Details - 12/20/1985
Problem: THE INNER AND OUTER PANELS OF THE FIBERGLASS HOOD COULD SEPARATE DURING VEHICLE OPERATION. Recall Details - 5/2/1983
1982 Recalls ↓
Problem: FUEL TANK VENTILATOR VALVE IN THE FUEL SYSTEM MAY PRODUCE A LOUD AND PERSISTENT "WHISTLE" DURING VENTING OF THE TANK. IF THE FUEL FILLER CAP IS REMOVED WHILE THIS CONDITION EXISTS AND THE TANK IS MORE THAN 3/4 FULL, GASOLINE MAY BE FORCED OUT OF THE FILLER NECK ONTO BYSTANDERS. Recall Details - 7/29/1982
Problem: THE INVOLVED VEHICLES DO NOT CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES". THE NON-COMPLIANCE EXISTS BECAUSE THE REAR SEAT BELT ANCHORAGES MAY PULL THROUGH THE UNDERBODY OF THE VEHICLE IF ENOUGH FORCE IS APPLIED. Recall Details - 9/21/1982
Problem: PARKING BRAKE ADJUSTER FAILS TO OPERATE AND DO NOT WORK AFTER BRAKE PAD WEAR. Recall Details - 4/11/1991
1981 Recalls ↓
Problem: ON CERTAIN VEHICLES, THE SEAT BELT RETRACTORS IN THE REAR SEATING POSITIONS CONTAIN FIRST LOCK POSITIONS WHICH WILL NOT LOCK WHEN USED BY SMALLER PASSENGERS. THIS FAILS TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, "OCCUPANT CRASH PROTECTION". Recall Details - 5/19/1981
1980 Recalls ↓
Problem: VEHICLES MAY FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS". PLACARD ON REAR EDGE OF LEFT DOOR MAY SHOW AN INCORRECT VEHICLE CAPACITY WEIGHT INSTEAD OF THE CORRECT FIGURE OF 800 LBS. Recall Details - 4/28/1980
Problem: ON CERTAIN VEHICLES, THE LOWER CONTROL ARM BALL JOINT TO STEERING KNUCKLE ATTACHING NUT MAY NOT HAVE BEEN TORQUED TO SPECIFICATIONS. THIS CONDITION COULD CAUSE THE NUT TO BACK OFF, RESULTING IN JOINT SEPARATION. Recall Details - 8/19/1980
1979 Recalls ↓
Problem: ON THE INVOLVED VEHICLES THE BRAKE STOPLIGHT AND CRUISE CONTROL SWITCH WHICH IS OPERATED BY THE BRAKE PEDAL MAY HAVE BEEN ASSEMBLED WITH AN INCORRECT LUBRICANT ON THE ACTUATING PLUNGER. THIS CAN CAUSE THE REAR BRAKE STOPLIGHTS TO BECOME INOPERATIVE AND THE CRUISE CONTROL, IF ACTIVATED, TO STAY ELECTRICALLY ENGAGED. Recall Details - 6/6/1979
Problem: ON CERTAIN VEHICLES, THE LOWER CONTROL ARM BALL JOINT TO STEERING KNUCKLE ATTACHING NUT MAY NOT HAVE BEEN TORQUED TO SPECIFICATIONS. THIS CONDITION COULD CAUSE THE NUT TO BACK OFF, RESULTING IN JOINT SEPARATION. Recall Details - 8/19/1980
1977 Recalls ↓
Problem: THE CENTER (SPIDER) SECTION OF WHEELS INSTALLED ON THESE VEHICLES MAY HAVE BEEN MANUFACTURED FROM AN INCORRECT GRADE OF STEEL. THE CENTER SECTION MAY FATIGUE AND SEPARATE FROM THE WHEEL RIM. Recall Details - 5/16/1977
1969 Recalls ↓
Problem: THERE IS A POSSIBILITY THAT A SEPARATED MOTOR MOUNT MAY ALLOW THE ENGINE TO LIFT, WHICH MAY AFFECT THE THROTTLE LINKAGE, MOMENTARILY INCREASING THROTTLE, POSSIBLY TO FULL THROTTLE. Recall Details - 12/29/1971
1968 Recalls ↓
Problem: THERE IS A POSSIBILITY THAT A SEPARATED MOTOR MOUNT MAY ALLOW THE ENGINE TO LIFT, WHICH MAY AFFECT THE THROTTLE LINKAGE, MOMENTARILY INCREASING THROTTLE, POSSIBLY TO FULL THROTTLE. Recall Details - 12/29/1971
1967 Recalls ↓
Problem: THERE IS A POSSIBILITY THAT A SEPARATED MOTOR MOUNT MAY ALLOW THE ENGINE TO LIFT, WHICH MAY AFFECT THE THROTTLE LINKAGE, MOMENTARILY INCREASING THROTTLE, POSSIBLY TO FULL THROTTLE. Recall Details - 12/29/1971
|