|
2003 Recalls ↓
Problem: CERTAIN PICKUP TRUCK, VAN, AND MINI VAN CONVERSIONS EQUIPPED WITH SOUTHERN COMFORT BUILT RUNNING BOARDS THAT CONTAIN CERTAIN COURTESY LIGHTS MANUFACTURED BY AMERICAN TECHNOLOGY COMPONENTS, INC. THESE UNITS CONTAIN A COURTESY LIGHT OR LIGHTS THAT MIGHT OVERHEAT WHEN THE WIRE HARNESS IS EXPOSED TO EXCESSIVE MOISTURE AND ROAD SALT. Recall Details - 3/7/2003
2002 Recalls ↓
Problem: CERTAIN PICKUP TRUCK, VAN, AND MINI VAN CONVERSIONS EQUIPPED WITH SOUTHERN COMFORT BUILT RUNNING BOARDS THAT CONTAIN CERTAIN COURTESY LIGHTS MANUFACTURED BY AMERICAN TECHNOLOGY COMPONENTS, INC. THESE UNITS CONTAIN A COURTESY LIGHT OR LIGHTS THAT MIGHT OVERHEAT WHEN THE WIRE HARNESS IS EXPOSED TO EXCESSIVE MOISTURE AND ROAD SALT. Recall Details - 3/7/2003
2001 Recalls ↓
Problem: CERTAIN PICKUP TRUCK, VAN, AND MINI VAN CONVERSIONS EQUIPPED WITH SOUTHERN COMFORT BUILT RUNNING BOARDS THAT CONTAIN CERTAIN COURTESY LIGHTS MANUFACTURED BY AMERICAN TECHNOLOGY COMPONENTS, INC. THESE UNITS CONTAIN A COURTESY LIGHT OR LIGHTS THAT MIGHT OVERHEAT WHEN THE WIRE HARNESS IS EXPOSED TO EXCESSIVE MOISTURE AND ROAD SALT. Recall Details - 3/7/2003
2000 Recalls ↓
Problem: CERTAIN PICKUP TRUCK, VAN, AND MINI VAN CONVERSIONS EQUIPPED WITH SOUTHERN COMFORT BUILT RUNNING BOARDS THAT CONTAIN CERTAIN COURTESY LIGHTS MANUFACTURED BY AMERICAN TECHNOLOGY COMPONENTS, INC. THESE UNITS CONTAIN A COURTESY LIGHT OR LIGHTS THAT MIGHT OVERHEAT WHEN THE WIRE HARNESS IS EXPOSED TO EXCESSIVE MOISTURE AND ROAD SALT. Recall Details - 3/7/2003
1990 Recalls ↓
Problem: INTERCONNECTION OF RETURN LINE PLUMBING FROM HYDROBOOST STEERING GEAR MAY CAUSE LIGHT APPLICATION OF HYDROBOOST UNIT WITHOUT APPLYING BRAKE PEDAL. Recall Details - 5/21/1990
Problem: INCORRECT SIZE MASTER CYLINDER INSTALLED WILL PROVIDE LESS LINE PRESSURE TO WHEEL CYLINDERS FOR A GIVEN PEDAL PRESSURE. Recall Details - 5/24/1990
1989 Recalls ↓
Problem: BOLTS THAT ATTACH THE FRONT AXLE TRACK BAR BRACKET TO THE FRONT CROSSMEMBER MAY LOOSEN, ALLOWING THE FRONT WHEELS TO OSCILLATE WITH FRONT END SHIMMY. Recall Details - 1/24/1989
Problem: INTERCONNECTION OF RETURN LINE PLUMBING FROM HYDROBOOST STEERING GEAR MAY CAUSE LIGHT APPLICATION OF HYDROBOOST UNIT WITHOUT APPLYING BRAKE PEDAL. Recall Details - 5/21/1990
1988 Recalls ↓
Problem: BOLTS THAT ATTACH THE FRONT AXLE TRACK BAR BRACKET TO THE FRONT CROSSMEMBER MAY LOOSEN, ALLOWING THE FRONT WHEELS TO OSCILLATE WITH FRONT END SHIMMY. Recall Details - 1/24/1989
1985 Recalls ↓
Problem: THE HYDRAULIC PARKING BRAKE CONTROL VALVE MAY INADVERTENTLY ACTIVATE DUE TO MOMENTARY PRESSURE DISRUPTIONS WITHIN THE SYSTEM AND CAUSE THE PARKING BRAKE TO BE APPLIED, STOPPING OR SLOWING THE TRUCK UNEXPECTEDLY. CONSEQUENCE OF DEFECT: THIS UNEXPECTED STOPPING OR SLOWING OF THE TRUCK MAY INCREASE THE RISK OF A REAR END COLLISION SINCE THE BRAKE (STOP) LIGHTS ARE NOT ACTIVATED. ALSO, ON CERTAIN ROAD CONDITIONS THIS OCCURRENCE MAY RESULT IN LOSS OF VEHICLE CONTROL WHICH WOULD LEAD TO AN ACCIDENT. Recall Details - 12/20/1985
1984 Recalls ↓
Problem: THE HYDRAULIC PARKING BRAKE CONTROL VALVE MAY INADVERTENTLY ACTIVATE DUE TO MOMENTARY PRESSURE DISRUPTIONS WITHIN THE SYSTEM AND CAUSE THE PARKING BRAKE TO BE APPLIED, STOPPING OR SLOWING THE TRUCK UNEXPECTEDLY. CONSEQUENCE OF DEFECT: THIS UNEXPECTED STOPPING OR SLOWING OF THE TRUCK MAY INCREASE THE RISK OF A REAR END COLLISION SINCE THE BRAKE (STOP) LIGHTS ARE NOT ACTIVATED. ALSO, ON CERTAIN ROAD CONDITIONS THIS OCCURRENCE MAY RESULT IN LOSS OF VEHICLE CONTROL WHICH WOULD LEAD TO AN ACCIDENT. Recall Details - 12/20/1985
1979 Recalls ↓
Problem: CERTAIN AIR BRAKE ANTI-LOCK MODULATORS COULD MALFUNCTION DURING OPERATION OF THE ANTI-LOCK SYSTEM. A NYLON PISTON WITHIN THE MODULATOR AIR VALVE SYSTEM CAN SWELL FROM EXPOSURE TO SYSTEM CONTAMINANTS. CONTINUED EXPOSURE MAY CAUSE THE PISTON TO SWELL TO THE EXTENT THAT INTERFERENCE WITH THE CYLINDER WALL WILL RESULT, CAUSING MOMENTARY STICKING OR A PERMANENT JAM. THIS CAN RESULT IN TEMPORARY OR PERMANENT LOSS OF BRAKING FOR THE AFFECTED AXLE. Recall Details - 3/29/1979
1978 Recalls ↓
Problem: THE INVOLVED VEHICLES ARE EQUIPPED WITH SAFETY COMPLIANCE CERTIFICATION LABELS AND INCOMPLETE VEHICLE DOCUMENTS THAT INDICATE THAT THE GROSS AXLE WEIGHT RATING (GAWR) IS APPROXIMATELY 0.6 TO 6.0 PERCENT GREATER THAN THE COMBINED LOAD CAPACITY OF THE TIRES AT THE SPECIFIED TIRE INFLATION PRESSURE. THIS FAILS TO COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NOS. 120, "AIR BRAKE SYSTEMS", AND 119, "NEW PNEUMATIC TIRES FOR VEHICLES OTHER THAN PASSENGER CARS", OR 109, "NEW PNEUMATIC TIRES". Recall Details - 10/25/1977
Problem: CERTAIN AIR BRAKE ANTI-LOCK MODULATORS COULD MALFUNCTION DURING OPERATION OF THE ANTI-LOCK SYSTEM. A NYLON PISTON WITHIN THE MODULATOR AIR VALVE SYSTEM CAN SWELL FROM EXPOSURE TO SYSTEM CONTAMINANTS. CONTINUED EXPOSURE MAY CAUSE THE PISTON TO SWELL TO THE EXTENT THAT INTERFERENCE WITH THE CYLINDER WALL WILL RESULT, CAUSING MOMENTARY STICKING OR A PERMANENT JAM. THIS CAN RESULT IN TEMPORARY OR PERMANENT LOSS OF BRAKING FOR THE AFFECTED AXLE. Recall Details - 3/29/1979
1977 Recalls ↓
Problem: CERTAIN AIR BRAKE ANTI-LOCK MODULATORS COULD MALFUNCTION DURING OPERATION OF THE ANTI-LOCK SYSTEM. A NYLON PISTON WITHIN THE MODULATOR AIR VALVE SYSTEM CAN SWELL FROM EXPOSURE TO SYSTEM CONTAMINANTS. CONTINUED EXPOSURE MAY CAUSE THE PISTON TO SWELL TO THE EXTENT THAT INTERFERENCE WITH THE CYLINDER WALL WILL RESULT, CAUSING MOMENTARY STICKING OR A PERMANENT JAM. THIS CAN RESULT IN TEMPORARY OR PERMANENT LOSS OF BRAKING FOR THE AFFECTED AXLE. Recall Details - 3/29/1979
Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING. Recall Details - 7/3/1978
1976 Recalls ↓
Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING. Recall Details - 7/3/1978
Problem: CERTAIN AIR BRAKE ANTI-LOCK MODULATORS COULD MALFUNCTION DURING OPERATION OF THE ANTI-LOCK SYSTEM. A NYLON PISTON WITHIN THE MODULATOR AIR VALVE SYSTEM CAN SWELL FROM EXPOSURE TO SYSTEM CONTAMINANTS. CONTINUED EXPOSURE MAY CAUSE THE PISTON TO SWELL TO THE EXTENT THAT INTERFERENCE WITH THE CYLINDER WALL WILL RESULT, CAUSING MOMENTARY STICKING OR A PERMANENT JAM. THIS CAN RESULT IN TEMPORARY OR PERMANENT LOSS OF BRAKING FOR THE AFFECTED AXLE. Recall Details - 3/29/1979
1975 Recalls ↓
Problem: CERTAIN AIR BRAKE ANTI-LOCK MODULATORS COULD MALFUNCTION DURING OPERATION OF THE ANTI-LOCK SYSTEM. A NYLON PISTON WITHIN THE MODULATOR AIR VALVE SYSTEM CAN SWELL FROM EXPOSURE TO SYSTEM CONTAMINANTS. CONTINUED EXPOSURE MAY CAUSE THE PISTON TO SWELL TO THE EXTENT THAT INTERFERENCE WITH THE CYLINDER WALL WILL RESULT, CAUSING MOMENTARY STICKING OR A PERMANENT JAM. THIS CAN RESULT IN TEMPORARY OR PERMANENT LOSS OF BRAKING FOR THE AFFECTED AXLE. Recall Details - 3/29/1979
Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING. Recall Details - 7/3/1978
1974 Recalls ↓
Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING. Recall Details - 7/3/1978
1973 Recalls ↓
Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING. Recall Details - 7/3/1978
1972 Recalls ↓
Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING. Recall Details - 7/3/1978
1971 Recalls ↓
Problem: THE ENGINE COOLING FAN BLADES MAY CRACK AND CHIP DUE TO HIGH STRESSES CAUSED BY VIBRATIONS. THE CHIPPED PIECES OF THE BLADE COULD FLY INTO THE UNDERHOOD COMPONENTS. ALSO, THESE PIECES COULD FLY OUT FROM THE VEHICLE IF THE HOOD IS OPEN AND THE ENGINE IS RUNNING. Recall Details - 7/3/1978
|