2008 CHRYSLER 300 RECALL - #14V567000
RECALL FOR ELECTRICAL SYSTEM : IGNITION
Chrysler Group LLC (Chrysler) is recalling certain model year 2008 Chrysler 300 vehicles manufactured May 31, 2007, to May 12, 2008, Dodge Magnum vehicles manufactured May 23, 2007, to May 12, 2008, Dodge Charger vehicles manufactured May 24, 2007, to May 12, 2008, Jeep Commander vehicles manufactured April 3, 2007, to May 12, 2008, and Jeep Grand Cherokee vehicles manufactured March 21, 2007, to May 12, 2008. In the affected vehicles, the ignition key (FOBIK) may not return to the "ON" position after being rotated to the "START" position, instead sticking between the two positions. Potentially, while the vehicle is being driven, the ignition may inadvertently move through the "RUN" position to the "ACCESSORY" or "OFF" ignition position, turning off the engine.
Information provided by the
National Highway Traffic Safety Administration.
•
Send to a friend
•
Hide Form
Recall Details
| Vehicle |
2008 CHRYSLER 300 |
|
| Manufacturer |
Chrysler Group LLC |
| Manufactured between |
5/31/2007 - 5/12/2008 |
| Recalled on |
9/17/2014 |
| Influenced by |
Chrysler Group LLC |
| Owners Notified on |
8/19/2015 |
| # Affected |
292,798 |
| Recalled for |
ELECTRICAL SYSTEM:IGNITION |
|
|
| Description |
Chrysler Group LLC (Chrysler) is recalling certain model year 2008 Chrysler 300 vehicles manufactured May 31, 2007, to May 12, 2008, Dodge Magnum vehicles manufactured May 23, 2007, to May 12, 2008, Dodge Charger vehicles manufactured May 24, 2007, to May 12, 2008, Jeep Commander vehicles manufactured April 3, 2007, to May 12, 2008, and Jeep Grand Cherokee vehicles manufactured March 21, 2007, to May 12, 2008. In the affected vehicles, the ignition key (FOBIK) may not return to the "ON" position after being rotated to the "START" position, instead sticking between the two positions. Potentially, while the vehicle is being driven, the ignition may inadvertently move through the "RUN" position to the "ACCESSORY" or "OFF" ignition position, turning off the engine. |
| Consequences |
If the ignition stays between "START" and "ON" positions it could cause loss of certain electrical functions. If the ignition key inadvertently moves into the "OFF" or "ACCESSORY" position, the engine will turn off, which will then depower various key safety systems including but not limited to air bags, power steering, and power braking. Loss of functionality of these systems may increase the risk of crash and/or increase the risk of injury in the event of a crash. |
| Corrective action |
Chrysler will notify owners, and dealers will replace the ignition switch and key FOBs, free of charge. The recall began August 19, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P57. |
| Notes |
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. |
| See also |
2008 CHRYSLER 300 Recall for POWER TRAIN, AXLE HUBS
2008 CHRYSLER 300 Recall for AIR BAGS, FRONTAL, DRIVER SIDE, INFLATOR MODULE
2008 CHRYSLER 300 Recall for AIR BAGS, FRONTAL, PASSENGER SIDE, INFLATOR MODULE
|
| Technical Service Bulletins |
May 03, 2021 - 060000 ENGINE AND ENGINE COOLING
Valve Body. These may cause over drive cycling.
Apr 26, 2021 - 100000 POWER TRAIN
NAG1 Transmission Before installing the transmission with the engine, check for dowel pins (2) for alignment. If the pins are missing request to add the dowel pin first and then install the transmission
Apr 19, 2021 - 070000 FUEL SYSTEM, GASOLINE
This SKU is a Engine Heater Hose Assembly. The customer communication requested return of unsold inventory to inspect the hose bending geometry. If the hose is not formed properly, it will interfere with surrounding components and prevent
Mar 15, 2021 - 110000 ELECTRICAL SYSTEM
Flash: Performance Derate Above 55 MPH Immediately After Start-Up When Accelerating At Wide Open Throttle This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number o
Oct 26, 2020 - 350000 EQUIPMENT
KEY BLANK WITH TRANSMITTER The key with an integrated FOB P/N 05183348AA is temporarily unavailable. The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the immobilizer blade key (no integra
View all Technical Service Bulletins
|
|