2000 INFINITI QX4 RECALL - #00V410000
RECALL FOR ELECTRICAL SYSTEM : IGNITION
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THESE VEHICLES MAY HAVE AN IGNITION LOCK ASSEMBLY WITH IMPROPERLY SEATED KEY CYLINDER CAP CONNECTOR PINS. VIBRATION CAN CAUSE THE CONNECTING PINS TO LOOSEN AND/OR FALL OUT ALLOWING THE KEY CYLINDER CAP TO DISENGAGE FROM THE KEY CYLINDER.
Information provided by the
National Highway Traffic Safety Administration.
•
Send to a friend
•
Hide Form
Recall Details
| Vehicle |
2000 INFINITI QX4 |
|
| Manufacturer |
NISSAN NORTH AMERICA, INC. |
| Manufactured between |
10/1/1999 - 3/22/2000 |
| Recalled on |
12/12/2000 |
| Influenced by |
NISSAN NORTH AMERICA, INC. |
| Owners Notified on |
12/22/2000 |
| # Affected |
9,200 |
| Recalled for |
ELECTRICAL SYSTEM:IGNITION |
|
|
| Description |
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THESE VEHICLES MAY HAVE AN IGNITION LOCK ASSEMBLY WITH IMPROPERLY SEATED KEY CYLINDER CAP CONNECTOR PINS. VIBRATION CAN CAUSE THE CONNECTING PINS TO LOOSEN AND/OR FALL OUT ALLOWING THE KEY CYLINDER CAP TO DISENGAGE FROM THE KEY CYLINDER. |
| Consequences |
IF THIS OCCURS, THE STEERING WHEEL LOCK ROD CAN MOVE, WHICH COULD LOCK THE STEERING WHEEL, INCREASING THE RISK OF A CRASH. |
| Corrective action |
DEALERS WILL INSPECT THE IGNITION LOCK ASSEMBLY AND ASSEMBLIES WITH LOOSE OR MISSING END CAP CONNECTOR PINS WILL BE REPLACED. A RING CLIP WILL BE INSTALLED ON ALL OTHERS TO PREVENT LOOSENING OF THE PINS. |
| Notes |
OWNER NOTIFICATION BEGAN DECEMBER 22, 2000. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INFINITI AT 1-800-662-6200.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
| See also |
2000 INFINITI QX4 Recall for FUEL SYSTEM, GASOLINE, STORAGE, TANK ASSEMBLY, FILLER PIPE AND CAP
2000 INFINITI QX4 Recall for STEERING, COLUMN
2000 INFINITI QX4 Recall for SUSPENSION, FRONT
|
| Technical Service Bulletins |
May 10, 2021 - 010000 STEERING
If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut P
May 10, 2021 - 010000 STEERING
SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake issues fall into th
May 10, 2021 - 020000 SUSPENSION
SERVICE INFORMATION This bulletin provides information to identify: - A leaking strut or a shock absorber that qualifies for replacement under warranty. - A strut or shock absorber that has slight oil seepage, a condition wh
May 10, 2021 - 020000 SUSPENSION
SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake issues fall into th
May 10, 2021 - 030000 BRAKES (PWS)
If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut P
View all Technical Service Bulletins
|
|
Comments
10/3/2010 - S.Pair
It's 2010 and this is still a good looking SUV! Great wheels and body and the original paint looks great. The only problems are electrical. Power seats, door locks, CD player no longer work properly. I've taken it for repairs but the problems still remain. This 6 cyl. averages 20 MPG, no matter how I try to improve.