by Volkswagen Group of America, Inc.
VW Jetta Recall for Power Train Problem - (7 Recalls Found)
Find your car listed below. Results are sorted year from newest to oldest. Select the desired vehicle to view the complete details.
Information provided by the National Highway Traffic Safety Administration.
|
|
|
Problem: Volkswagen of America, Inc. (Volkswagen) is recalling certain model year 2014 Jetta, Beetle, Beetle Convertible, and Passat vehicles equipped with a 1.8T engine and torque converter automatic transmission. In the affected vehicles, the O-ring seals between the oil cooler and the transmission may leak fluid. Recall Details
Problem: VOLKSWAGEN IS RECALLING CERTAIN MODEL YEAR 2009 AND 2010 PASSENGER CARS MANUFACTURED BETWEEN SEPTEMBER 2008 AND AUGUST 2009. THE WIRING HARNESS OF A TEMPERATURE SENSOR IN THE DIRECT SHIFT GEARBOX (DSG) MAY HAVE CONNECTOR WIRES THAT WERE INSUFFICIENTLY CRIMPED. WITH INSUFFICIENTLY CRIMPED CONNECTOR WIRES, A TEMPERATURE SENSOR HAS THE POTENTIAL TO FALSELY DETECT A HIGH GEARBOX OIL TEMPERATURE, CAUSING THE TRANSMISSION TO ABRUPTLY SHIFT TO NEUTRAL. IF THIS HAPPENS, THE SELECTOR LEVER POSITION INDICATOR WITHIN THE INSTRUMENT PANEL WILL FLASH. IN ADDITION, THE "DEPRESS BRAKE PEDAL" INDICATOR LIGHT WILL BE ILLUMINATED, ALERTING THE DRIVER TO APPLY THE BRAKES. Recall Details
Problem: VOLKSWAGEN IS RECALLING 25,594 MY 2006-2009 JETTA 5TH GENERATION EQUIPPED WITH 2.01 ENGINE. THE FASTENING SCREW CONTACT SURFACES ON THE DRIVESHAFT COVER PLATE MAY NOT HAVE BEEN MANUFACTURED TO FACTORY SPECIFICATIONS. SOME SCREWS MAY NOT HAVE BEEN TORQUED PROPERLY DURING ASSEMBLY AND COULD LOOSEN OVER TIME, CAUSING A KNOCKING SOUND WHEN THE VEHICLE IS IN MOTION. THE DRIVESHAFT SCREWS COULD LOOSEN TO THE POINT WHERE THE DRIVESHAFT DETACHES FROM THE GEARBOX. Recall Details
Problem: VOLKSWAGEN IS RECALLING CERTAIN MODEL YEAR 2009 AND 2010 PASSENGER CARS MANUFACTURED BETWEEN SEPTEMBER 2008 AND AUGUST 2009. THE WIRING HARNESS OF A TEMPERATURE SENSOR IN THE DIRECT SHIFT GEARBOX (DSG) MAY HAVE CONNECTOR WIRES THAT WERE INSUFFICIENTLY CRIMPED. WITH INSUFFICIENTLY CRIMPED CONNECTOR WIRES, A TEMPERATURE SENSOR HAS THE POTENTIAL TO FALSELY DETECT A HIGH GEARBOX OIL TEMPERATURE, CAUSING THE TRANSMISSION TO ABRUPTLY SHIFT TO NEUTRAL. IF THIS HAPPENS, THE SELECTOR LEVER POSITION INDICATOR WITHIN THE INSTRUMENT PANEL WILL FLASH. IN ADDITION, THE "DEPRESS BRAKE PEDAL" INDICATOR LIGHT WILL BE ILLUMINATED, ALERTING THE DRIVER TO APPLY THE BRAKES. Recall Details
Problem: VOLKSWAGEN IS RECALLING 25,594 MY 2006-2009 JETTA 5TH GENERATION EQUIPPED WITH 2.01 ENGINE. THE FASTENING SCREW CONTACT SURFACES ON THE DRIVESHAFT COVER PLATE MAY NOT HAVE BEEN MANUFACTURED TO FACTORY SPECIFICATIONS. SOME SCREWS MAY NOT HAVE BEEN TORQUED PROPERLY DURING ASSEMBLY AND COULD LOOSEN OVER TIME, CAUSING A KNOCKING SOUND WHEN THE VEHICLE IS IN MOTION. THE DRIVESHAFT SCREWS COULD LOOSEN TO THE POINT WHERE THE DRIVESHAFT DETACHES FROM THE GEARBOX. Recall Details
Problem: VOLKSWAGEN IS RECALLING 25,594 MY 2006-2009 JETTA 5TH GENERATION EQUIPPED WITH 2.01 ENGINE. THE FASTENING SCREW CONTACT SURFACES ON THE DRIVESHAFT COVER PLATE MAY NOT HAVE BEEN MANUFACTURED TO FACTORY SPECIFICATIONS. SOME SCREWS MAY NOT HAVE BEEN TORQUED PROPERLY DURING ASSEMBLY AND COULD LOOSEN OVER TIME, CAUSING A KNOCKING SOUND WHEN THE VEHICLE IS IN MOTION. THE DRIVESHAFT SCREWS COULD LOOSEN TO THE POINT WHERE THE DRIVESHAFT DETACHES FROM THE GEARBOX. Recall Details
Problem: VOLKSWAGEN IS RECALLING 25,594 MY 2006-2009 JETTA 5TH GENERATION EQUIPPED WITH 2.01 ENGINE. THE FASTENING SCREW CONTACT SURFACES ON THE DRIVESHAFT COVER PLATE MAY NOT HAVE BEEN MANUFACTURED TO FACTORY SPECIFICATIONS. SOME SCREWS MAY NOT HAVE BEEN TORQUED PROPERLY DURING ASSEMBLY AND COULD LOOSEN OVER TIME, CAUSING A KNOCKING SOUND WHEN THE VEHICLE IS IN MOTION. THE DRIVESHAFT SCREWS COULD LOOSEN TO THE POINT WHERE THE DRIVESHAFT DETACHES FROM THE GEARBOX. Recall Details
|